User manual YAMAHA CD-N500

[. . . ] 1 2 To assure the finest performance, please read this manual carefully. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Top: 10 cm (4 in) Rear: 10 cm (4 in) Sides: 10 cm (4 in) Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. [. . . ] Setup menu operations ❚ Operations from the remote control y For details on the controls on the main unit or remote control, see “CONTROLS AND FUNCTIONS” (☞ P. 25) selectable, press SETUP while holding down RETURN (on the main unit). In this case, press / to move the target and / to select a number, or use the numeric buttons. Remote control 1 2 3 Numeric buttons 4 5 6 7 8 9 0 PROGRAM CLEAR SHUFFLE REPEAT A/B / / / / ENTER ENTER RETURN HOME NOW PLAYING RETURN SETUP MODE SETUP Main unit SELECT PUSH ENTER RETURN RETURN English Front panel display 1 Network Configuration 23 En SETUP MENU Setup menu list Menu Submenu Settings (Bold: default) On, Off Function Select “On” to use the DHCP server to automatically configure the network settings of this unit or “Off” to configure manually. *1 Specify the subnet mask when “DHCP” is “Off”. *1 Specify the default gateway when “DHCP” is “Off”. *1 Specify the primary DNS server when “DHCP” is “Off”. *1 Specify the secondary DNS server when “DHCP” is “Off”. The network status of this unit is shown (“Connected” or “Not connected”). on , Off 4 Hours , 8 Hours , 12 Hours , Off –3 to 0 Select “On” to enable the network standby mode. This unit automatically enters standby mode if it is left turned on for the selected time without playback or any other operation being performed. Network, USB Update the firmware of this unit after selecting “Network” or “USB”. when “Press ENTER to start” appears , press ENTER to start firmware update. DHCP IP Address Subnet Mask Network Configuration Default Gateway DNS Server (P) DNS Server (S) MAC Address Network Information Status System ID Network Standby Auto Power Down Dimmer Firmware Version Firmware Update *1: When “DHCP” is “On”, you can check the values (IP address, etc. 24 En SETUP MENU Advanced setup menu The following menu items are available only when you enter the setup menu by pressing SETUP (on the remote control) while holding down RETURN (on the main unit). Settings (Bold: default) On, Off Menu Function Select “On” to specify the MAC addresses (up to 5) of the network components that will be permitted access to this unit (“Address1” to “Address5”). MAC Address Filter Gapless Playback On, Off y When “Gapless Playback” is “On”, this unit starts to read data of the next track at the end of the current track. Select “Yes” and press ENTER on the remote control to reset the vTuner account. Y • If you reset your vTuner account, your user name, password and bookmarks will be reset. Com/ You need the MAC address of this unit as the ID for your Media player and your e-mail address. VTuner Account Reset Yes, No Initialize Yes, No Select “Yes” to reset the settings of this unit to factory default. The reset operation will be reflected the next time you turn on this unit. [. . . ] Notice for Windows Media DRM Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. If the WMDRM software fails to protect the content, content owners may ask Microsoft to revoke the software’s ability to use WMDRM to play or copy protected content. When you download licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. [. . . ]