User manual YAMAHA AW4416

[. . . ] PROFESSIONAL AUDIO WORKSTATION Operation Guide E FCC INFORMATION (U. S. A. ) 1. This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. [. . . ] Tip! · If the Patch Lib tab is not assigned to the [F3] key, press the [SHIFT] key + [F1] key to switch the tabs, and then press the [F3] key. · Patch library numbers in which no data has been stored will be displayed with a title of "[No Data!]". 2. Use the [DATA/JOG] dial to select the patch library number (01­20) in which you will store the settings. Tip! Patch library number 00 contains a preset patch program (recall-only) that returns all patch settings to the initial state. For this reason, your settings cannot be stored in patch number 00. 3. Move the cursor to the STORE button, and press the [ENTER] key. A TITLE EDIT popup window will appear, allowing you to assign a name to the patch program. 4. Use the CURSOR [ ]/[ ]/[ ]/[ ] keys and the [ENTER] key to specify the name for the patch program. For details on inputting characters, refer to page 60. 138 -- Operation Guide Chapter8--Patching Tip! You can also write the patch program directly, without accessing the TITLE EDIT popup window. To do so, turn off the STORE CONFIRMATION setting in the UTILITY screen Prefer. 1 page ([UTILITY] key ¡ [F2] key). In this case, your settings will be saved in a library named "New Data" when you execute step 3. 5. To execute the Store operation, move the cursor to the OK button and press the [ENTER] key. Tip! If you decide to cancel without storing, move the cursor to the CANCEL button and press the [ENTER] key. Recalling a patch program Here's how to recall a patch program that you saved in the patch library. 1. Press the [SETUP] key ¡ [F3] (Patch Lib) key to access the SETUP screen Patch Lib page. Use the [DATA/JOG] dial to select the patch program that you wish to recall. Move the cursor to the RECALL button and press the [ENTER] key. A popup window will ask you to confirm the Recall operation. Tip! You can also recall the patch program directly, bypassing the confirmation popup window. To do so, turn off the RECALL CONFIRMATION setting in the UTILITY screen Prefer. 1 page ([UTILITY] key ¡ [F2] key). 4. To execute the Recall, move the cursor to the OK button and press the [ENTER] key. Tip! If you decide to cancel without recalling, move the cursor to the CANCEL button and press the [ENTER] key. -- Operation Guide 139 Chapter8--Patching Patching input/output jacks to an insert I/O point You can patch various input/output jacks to the insert I/O point of a channel. This patching method allows you to apply an external effect to a monitor channel during mixdown. 1. Use the MIXING LAYER section keys and the [SEL] keys to select the channel whose insert I/O point you wish to patch to input/output jacks. Press the [VIEW] key ¡ [F1] key. The display will show the VIEW screen CH View page. In the example shown here, monitor channel 1 is selected. EFFECT INSERT field 3. Move the cursor to the ASSIGN button of the EFFECT INSERT field, and press the [ENTER] key. The EFF. INSERT SETTING popup window will appear. fields of the popup window will respectively show the types of output jack and input jack that are patched. 4. Move the cursor to the EXTERNAL button and press the [ENTER] key. 140 -- Operation Guide Chapter8--Patching 5. Move the cursor to the SEND field, and use the [DATA/JOG] dial to select the insert send jack. You can select from the following jacks. [. . . ] · If you write to CD-R media using Track At Once, a popup window will ask you whether you wish to finalize the disc. 13. If you wish to execute the Finalize operation, move the cursor to the OK button and press the [ENTER] key. The CD-RW tray will close automatically, and the disc will be finalized. If you do not wish to finalize, move the cursor to the CANCEL button and press the [ENTER] key. In this case, additional data can be recorded later on the ejected CD-R media. 262 -- Operation Guide Chapter17--Mastering Finalizing As long as you have not executed the Finalize operation, other stereo track data can be added to CD-R media that was recorded using Track At Once. [. . . ]