User manual YAMAHA A5000

[. . . ] SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. [. . . ] The original key of the new sample is determined by the Knob 3 (Original Key) setting, and the Key Range Low and High values are set to =Orig (i. e. When a number of samples are recorded sequentially the originally key is automatically shifted upward by one note for each sample. · When the New+ Record Type is selected (sequential recording) and Key Map is set to Auto, the original key of each new sample recorded is automatically shifted up one note. · This parameter cannot be set when the Record Type is set to Replc. [ Press] MIDI When this knob is pressed the parameter can be directly set by a MIDI message received from an external MIDI device (page 82). Knob 5 [ Turn] High Key Turn the knob to set the high end for the sample's key range. [Range] C-2 -- G8, =Orig. The original key value is used. · The key range cannot be set if the Record Type is set to Replc (the settings of the selected sample are used). [ Press] MONITOR Pressing this knob alternately turns the MONITOR function on and off. A speaker icon appears above Knob 2 when the MONITOR function is turned on. [ Press] MIDI When this knob is pressed the parameter can be directly set by a MIDI message received from an external MIDI device (page 82). 154 Chapter 6 RECORD Mode · A5000/A4000 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq RECORDING-SETUP When Key Map (Knob 2) Is Set To Auto Knob 4 No function. · When StOut, DIGITAL, or OPTICAL is selected the Record Effect on/off parameter (REC-EFFECTEfType, page 160) will automatically be turned off (record effects cannot be used). · When DIGITAL or OPTICAL is selected, the Stereo/ Mono parameter (Knob 3) will automatically be set to Stereo. · If you select STOut, then MIDI control-change messages (as well as pitchbend and aftertouch messages) are all disabled during recording. In addition, maximum polyphony (the maximum number of monaural samples that can play at one time) is limited to 4 (so that you cannot record sound from more than 4 monaural or 2 stereo samples at any given moment). Knob 5 [ Turn] Map Key When the Key Map parameter is set to Auto, this parameter determines whether new samples will be mapped to only the white keys or to all keys. [Range] white, all [ Cursor e Press] MONITOR Pressing this knob alternately turns the MONITOR function on and off. A speaker icon appears above Knob 2 when the MONITOR function is turned on. Knob 3 Cursor [ e Knob 1 Turn action Press action Cursor/Page Tree View Knob 2 Input MONITOR Knob 3 Stereo / Mono -- Knob 4 Frequency -- Knob 5 Pre Trigger -- Turn] Stereo/Mono Determines whether new samples will be recorded as stereo or mono samples. [Range] Mono, Stereo · Mono . . . When AD L is selected a signal connected to the AD L input will be recorded as a mono sample. When AD R or StOut is selected, or when recording the stereo output from a record effect, the L and R channel signals will be mixed and recorded as a mono sample. When AD L is selected a signal connected to the AD L input will be recorded on both the L and R channels as a stereo sample (the same signal will be recorded on the L and R channels). When AD R or StOut is selected, or when recording the stereo output from a record effect, the L and R channel signals will be recorded as a stereo sample. When the DIGITAL or OPTICAL input is selected this parameter will be automatically set to Stereo (Mono cannot be selected). Knob 1 Same function as Cursor q (page 153). Knob 2 [ Turn] Input This setting selects the input source for the recording. Note that the DIGITAL and OPTICAL settings are effective only if you have installed the optional I/O expansion board (AIEB1 board). [Range] AD L, AD L/R, StOut, DIGITAL, OPTICAL · AD L . . . Record analog signal from both frontpanel input jacks (INPUT-L and INPUT-R). Record the signal that the A5000/A4000 is producing and transmitting to its own stereo outputs. (A process called resampling: the A5000/A4000 re-records its own signal. You use this setting to record playback that you control from a MIDI keyboard or other such device. ) · DIGITAL . . . Record the digital signal supplied to the DIGITAL IN connector on the AIEB1 expansion board. Record the digital signal supplied to the OPTICAL IN connector on the AIEB1 expansion board. Knob 4 [ Turn] Frequency This setting selects the sampling frequency the A5000/ A4000 uses to record the input. [Range] If Input is set to AD L, AD L/R, or StOut: 44. 1k(44. 1kHz), 22k(22. 05kHz), 22kLoFi, 11k(11. 025kHz), 11kLoFi, 5k(5. 5125kHz), 5kLoFi q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 · Chapter 6 RECORD Mode 155 RECORDING-SETUP If Input is set to DIGITAL or OPTICAL: ext, ext/2, ext/4, ext/8 · ext . . . The sample is recorded at 1/8 the input sampling frequency. · The higher the sampling frequency the higher the sound quality, but samples recorded at higher frequencies use up correspondingly more memory/disk space. [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 ITALY Yamaha Musica Italia S. P. A. , Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 ASIA HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 SPAIN/PORTUGAL Yamaha-Hazen Electronica Musical, S. A. 17, 200, 28230 Las Rozas (Madrid) Spain Tel: 91-201-0700 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]