User manual XINDAK XF-1000ES

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual XINDAK XF-1000ES. We hope that this XINDAK XF-1000ES user guide will be useful to you.


XINDAK XF-1000ES : Download the complete user guide (1097 Ko)

Manual abstract: user guide XINDAK XF-1000ES

Detailed instructions for use are in the User's Guide.

[. . . ] is a registered trademark of Chengdu Xindak Electronic Co. , LTD All rights reserved by Chengdu Xindak Electronic Co. [. . . ] (Switchable) 2 Preamplifier/Accessories 6 This unit requires single-phase 3-lines input. When using single-phase 2-lines power input, DO connect the grounded biding post on back of the unit to the ground and make sure the phase of the input power is correct. Plug the attached 3-lines power cable into the power input socket on the rear panel, the power indicator will be light on. Touch the phase detect touching terminal to detect the phase of the power output socket. If the phase detect indicator is not light, the power output socket will be: A: Ground, B: Natural, C: Live. (See fig4) Otherwise, if the indicator is light it will be A: Ground, B: Live, C: Natural. CHENGDU XINDAK ELECTRONIC CO. , LTD CAUTION Always remove mains plug from wall socket before any service unless qualified to do so. This unit contains dangerous voltages AC INPUT 220V/230V ±10% 50/60Hz FUSE F10A RISK OF ELECTRIC SHOCK DO NOT OPEN Polarity AC POWER LINE RECEPTACLE/FILTER XF-1000ES 9 Ground 1 SPECIFICATION 2 10 NO. : Made in China 8 Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. Spike Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the indicator is on, it means the phase of the power supply input is not corresponding, should change the phase switch; if the indicator is off, it means the phase of the power supply input is corresponding. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE XINDAK XF-1000ES




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual XINDAK XF-1000ES will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.