User manual XINDAK CA-1

[. . . ] LTD. PURPOSE AND CHARACTERS Thank you for purchasing this AC LINE - Conditioner specially designed for Hi-Fi acoustics. It solved the problem of scattering sound and impure tones caused by the interface of miscellaneouswaves in the electrical network when playing. Meanwhile, it can be used for other electrical appliances in conformity with the conditions of this appliance, which filters the miscellaneous waves produced by appliance itself, but does not pollute the electrical network. To better use this appliance, please read the following content carefully. INSTRUCTIONS CA-1 The switch for the power supply control: Through this switch can turn on or turn off the power of Group 2 and Group 3 two output power socket groups. Output Group 1: Supply output current of 3A (Max. ) to the electric equipment. [. . . ] This socket group CAN NOT be controlled by the power switch. On the power supply of the input socket is being putting through, this socket group will output the power. Output Group 3: Supply the output power of 5. 5A (Max. ) to the electric equipment. This socket group is controlled by the power switch. AC POWER LINE RECEPTACLE/FILTER CA-1 INDICATION ON 3 Power Amplifier 1 2 DETECT OFF Subtotal 5. 5A Max. (Unswitchable) The grounded connection: This unit uses single-phase 3-lines input. When using the power supply with single-phase 2-lines input which is not grounded, must ground this connection. 5 The power input socket: The power input interface of this machine, with the fuse box. 1 Digital Accessories 7 USING STEP Subtotal 5A Max. 3000V Max. Clamping Volt (8x20 SEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470V Max. Surge Current (8x20 SEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000A Noise Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10dB55dB(2100MHz) A B (Fig 4) C NOTICE NAME AND FUNCTION 1 Power Indication 4 Power Switch 7 Output Group 1 10 Because of the high voltage and heavy current inside, please not dismantle by yourself. If there is any fault, please cut off the power supply and send it to examine and repair. [. . . ] If there is any fault, please cut off the power supply and send it to examine and repair. Please disconnect this unit with the power supply and the connected electric equipment, before changing the fuse. 2 Polarity Detect Button 5 Output Group 3 8 Power Input Socket 3 Voltage Meter 6 Output Group 2 9 Polarity Switch PARAMETERS Max Spike Volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000V Max Clamping Volt (8X20s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470V Max Surge Current (8X20s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000A Noise Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10dB~55dB(2-100MHz) Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC250V 10A Max. Grounded Connection The phase detecting indicatorIndicate whether the phase of the power supply is corresponding. [. . . ]