User manual WORTHEN UPACO ADHESIVES

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WORTHEN UPACO ADHESIVES. We hope that this WORTHEN UPACO ADHESIVES user guide will be useful to you.


WORTHEN UPACO ADHESIVES : Download the complete user guide (153 Ko)

Manual abstract: user guide WORTHEN UPACO ADHESIVES

Detailed instructions for use are in the User's Guide.

[. . . ] PRODUCT APPLICATIONS UPACO Adhesives Foam Fabricating Adhesives Group WATER-BASED ADHESIVES FOR FOAM FABRICATING UPACO offers a variety of water-based products for foam fabricating. Whichever product best fits your requirements, be assured, we provide the best water-based fabricating adhesives in the market today. [. . . ] Provides better lay up on foam, higher wet tack at the surface, and longer open time. A synthetic one-part spray adhesive designed for fabrication of cushions and mattresses; features excellent wet tack, long tack time, and strong bonds to dense foams or viscoelastic. Lower cost than FABOND 180, but does not bond thin fabrics such as tear strips. Designed as a two-part adhesive for office chairs, bus seats, and automotive applications. This two-part synthetic is easy to use, employs a non-harsh coagulant, and provides very aggressive tack and bonding strength for higher density foams. One Part Natural Latex FABOND 805 Synthetic Spray Applied Products FABOND 180 FABOND 280 FABOND 499 FABOND 886 OTHER WATER BASED PRODUCTS Product FOAMLAM 935 FOAMLAM 8200 & FOAMLAM 8201 Description A synthetic adhesive for rollcoat application to large, flat pieces. Allows one-way application of adhesive, the second piece can than be joined with minimal compression. Adhesives designed for laminating fabrics or vinyls to foam in wide web laminating presses. They pass differing burn and automotive specifications. FOAMCOAT 501-B & FOAMCOAT 916-A Coatings that provide slip to foam for ease of cushion stuffing -1- PRODUCT APPLICATIONS WATER-BASED ADHESIVES FOR FOAM FABRICATING HOW TO USE FABOND ADHESIVES To apply Fabond adhesives, spray both sides of parts to be joined. For foam to foam, the amount varies with the density of the foams, heavier density foams require more adhesive to obtain a foam tearing bond. Wrapping with fabric generally requires very little adhesive, yet the application of tear strips will require enough adhesive to approach saturation of the fabric. The amount of adhesive used will change the tack and open times, the less adhesive used, the faster parts can be joined. For this reason, the least amount of adhesive needed per part should be determined, because this will lead to the maximum efficiency in a spray operation. [. . . ] Contact UPACO Adhesives at (800) 446-9984 for more information. UPACO Adhesives Group Worthen Industries, Inc. 4105 Castlewood Road Richmond, VA 23234 (804) 275-9231 (800) 446-9984 Fax: (804) 743-8366 www. worthenindustries. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WORTHEN UPACO ADHESIVES




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WORTHEN UPACO ADHESIVES will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.