User manual WOLFCRAFT 6165

[. . . ] Subsequently loosen by a 1/4 of a turn so that you are able to fold the table together. G Caution: before folding the table, it is imperative that the power and appliance plug be disconnected from the safety switch!Rotate the worktop (180°), align the hand circular saw so that the saw blade moves in the centre of the gap insert. [. . . ] The use of circular saw blades made of high-alloyed HSS is not permitted!Use only faultless saw blades; the basic body can not be thicker and the crossing can not be smaller than the width of the splitting wedge. Never use your work table improperly or in a way, it was not intended to be used!Cutting of round wood is only permitted, if the work piece is secured against distortion from both sides. Exception: Using a suitable saw blade, easy to chip metals (such as aluminium) can also be processed Never move work pieces against the working direction while the machine is running!Near the running saw blade, loose splinters, chips or similar materials must not be removed by hand!After switching off the machine, the saw blades must not be stopped by lateral counterpressure!Disconnect the power: - before changing of attachments or tools - before maintenance jobs - while not in use Before starting to work check the function of attachments and tools. Make sure you clothing fits closely (especially sleeves) and protect your hair. Make sure all electrical tools are protected from moisture, dust or humidity. Keep children away from your workshop and store your appliances and tools in a safe place. Never let inexperienced people work with your appliances or tools without supervision. Use only Original wolfcraft® spare parts Use the dust extraction of your circular saw. it is not permitted to remove the splitting wedge of the circular saw. Always use a push stick when cutting narrow work pieces (distance between parallel stop and saw blade less then 120 mm). A deflector wedge should be used to make sure, that the toothed rim of the saw blade will not catch and throw out any cut-off pieces (page 21 - 13) The gap insert is to be replaced should the saw gap be damaged. [. . . ] The validity of this guarantee is subject to the use of the appliance solely for domestic purposes, proper handling and the use of original wolfcraft® spare parts. Claims under guarantee are only valid with a fully completed guarantee card. Friedrich Wolff Entwicklungleiter G EC Declaration of conformity wolfcraft GmbH in D - 56746 Kempenich hereby certifies, that this product complies with the guidelines 98/37/EG. [. . . ]