User manual WHITE BROWN DB 713

[. . . ] â· Never immerse the product in water or any other liquid for any reasons. Do not use the appliance outside and always place it in a dry environment. â· Do introduce neither sharp metallic objects, nor fingers inside the appliance. Never use the cord, the plug or the appliance when they show any sign of damage. [. . . ] â· The power cable must never be in contact with the soleplate of the iron. â· Never put the appliance under the tap to fill with water. â· Aiming the jet steam at people is dangerous and should be avoided. â· Never unscrew the boiler cap when the appliance is plugged into the mains. Can be restored by holding the iron a few cm above the fabric whilst pressing the steam button. â· Carpets or rugs can be restored to new, eliminating marks left by furniture resting on them, by penetrating the flattened area with steam and then brushing lightly. â· Never rest or use the iron on zips, hooks, rings etc as this could scratch the plate. â· After use, always wait for the iron to cool before putting it away. Keep attention not to let the cables touch the hot parts of the appliance. â· If the appliance is not used for a long time it is suggested, before ironing, to press the steam supply button for 30 seconds putting the iron on a cloth ; this to clean the internal tubes of the appliance. â· Divide garments according to the required ironing temperature, starting with those which require the coolest temperature. â· Wool, cotton and fine linen fabrics can be steam ironed on the wrong side or alternatively on the right side with a thin layer of material between the fabric to be ironed and the iron to avoid "shine". Iron white and light fabrics on the right side and dark colours on the wrong side. â· Linen can be steam ironed, steaming abundantly and ironing dark fabrics only on the wrong side to avoid "shine". Each time you use the iron (and when you use it for the first time) or if you have not used steam for several minutes, push the steam button repeatedly. Before steam ironing, make sure the fabric is suitable for this type of ironing. Before filling the tank, make sure the appliance is unplugged from the mains. â· Remove the boiler cap (9) and fill the tank with water. â· Replace the cap securely by pressing down and rotating it clockwise until it stops. IMPORTANT : never unscrew the cap (6) when the boiler is under pressure. [. . . ] If the light turns to red during ironing, the iron will heat up quickly and turn green again. â· Do not press "On/Off Steam button" (8) and check that it is not already set. The appliance has to be descaled every 1 to 3 monthes, according to hardness of used water. â· First check there is no steam remaining in the boiler. [. . . ]