User manual WHIRPOOL AKZ 479IX

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] LIST OF FUNCTIONS Turn the “Functions” knob to any position and the oven switches on: the display shows the functions or the associated submenus. The submenus are available and selectable by turning the knob to the functions GRILL, SPECIALS, SETTINGS, BREAD/PIZZA, AUTOMATIC OVEN CLEANING. : for the list and description of functions, see the specific table at pag. Display of heating elements activated during the various cooking functions Time management symbols: timer, cooking time, end of cooking time, time Information regarding selected functions Automatic BREAD/PIZZA function selected Indication of door locked during automatic cleaning cycle (pyro-cleaning) Internal oven temperature Pyrolisis function Browning Special functions: defrosting, keep warm, rising STARTING THE OVEN - SETTING THE TIME After connecting the oven to the mains power, the time must be set on the clock. Turn the “Browse” knob to display the correct hour. Press the button 3 to confirm; the two minute digits flash on the display. Turn the “Browse” knob to display the correct minutes. To change the time, for example following a power cut, see the next paragraph (SETTINGS). Turn the “Functions” knob to the desired function: the cooking settings are shown on the display. SETTING THE TEMPERATURE/OUTPUT OF THE GRILL To change the temperature or output of the grill, proceed as follows: 1. Turn the “Browse” knob to display the desired value. The oven automatically confirms your selection 10 seconds after the last operation. Turn the “Functions” knob to the symbol to select the fast preheating function. to change the temperature , proceed as described in previous paragraphs. At the end of preheating, the oven automatically selects the conventional function . If you wish to set a different cooking function, turn the “Functions” knob and select the desired function. SETTING COOKING TIME This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically. The oven automatically confirms your selection 10 seconds after the last operation. SETTING END OF COOKING TIME /START DELAYED IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA, GENTLE CONVECTION BAKE. : with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly longer than stated in the cooking table. The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol flashes. [. . . ] Cooking different foods at the same time Using the “GENTLE CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. desserts Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always position them on the wire shelf supplied. [. . . ]