User manual WHIRLPOOL WGD87HEDC USE & CARE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WGD87HEDC. We hope that this WHIRLPOOL WGD87HEDC user guide will be useful to you.


WHIRLPOOL WGD87HEDC USE & CARE GUIDE: Download the complete user guide (6182 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WGD87HEDC INSTRUCTION SHEET (795 ko)
   WHIRLPOOL WGD87HEDC INSTRUCTION SHEET (795 ko)
   WHIRLPOOL WGD87HEDC INSTALLATION GUIDE (9064 ko)
   WHIRLPOOL WGD87HEDC WARRANTY INFORMATION (72 ko)
   WHIRLPOOL WGD87HEDC QUICK REFERENCE SHEET (1987 ko)
   WHIRLPOOL WGD87HEDC DIMENSION GUIDE (317 ko)
   WHIRLPOOL WGD87HEDC INSTRUCTION SHEET (795 ko)
   WHIRLPOOL WGD87HEDC INSTALLATION GUIDE (9064 ko)
   WHIRLPOOL WGD87HEDC WARRANTY INFORMATION (72 ko)
   WHIRLPOOL WGD87HEDC QUICK REFERENCE SHEET (1987 ko)
   WHIRLPOOL WGD87HEDC VENTILATION SPECIFICATION (1518 ko)

Manual abstract: user guide WHIRLPOOL WGD87HEDCUSE & CARE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Couverture arrière Dryer Safety 2 IMPORTANT: When discarding or storing your old clothes dryer, remove the door. 3 Accessories Enhance your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, call 1-800-901-2042, or visit us at: www. See the “Additional Features” section for more information. [. . . ] Done This will indicate that the selected cycle has ended and the load may be removed from the dryer. If Wrinkle Shield™ option has been selected, the dryer may continue to tumble the load, even if the Done indicator is lit. Sensing The Sensing indicator will light during Automatic Cycles to indicate that the moisture sensor on the dryer is operating. This indicator will not light during Manual Cycles or options such as Wrinkle Shield. Static Reduce This indicator will light when the Static Reduce function is active. Steaming This indicator will light when the Steam function is active. Wrinkle Shield™ Option This indicator will light if the Wrinkle Shield™ option has been selected and is running. The dryer will periodically tumble the load for up to 140 minutes after the cycle has ended. Align the two hooks on the front of the drying rack with the holes in the dryer door opening and press down fully into holes. The drying rack does not move, but the drum will rotate; be sure to leave adequate clearance between items and the inside of the dryer drum. Make sure items do not hang over the edges or between drying rack grille. Items containing foam, rubber, or plastic must be dried on a clothesline or by using the Air Only setting. When the cycle is selected, the Estimated Time Remaining display shows the default time. You can change the actual time in the cycle by increasing or decreasing the cycle time. NOTE: Check the lint screen and remove any lint accumulated from items dried on the drying rack after the cycle is finished. 12 Dryer Care CLEANING THE DRYER LOCATION Keep dryer area clear and free from items that would block the airflow for proper dryer operation. CLEANING THE LINT SCREEN Every load cleaning The lint screen is located in the door opening of the dryer. The control panel has an indicator light to remind you to clean the lint screen after each load. IMPORTANT: n Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics. N If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements” in the Installation Instructions. [. . . ] Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration, or modification of the appliance. Cosmetic damage including scratches, dents, chips, and other damage to appliance finishes unless such damage results from defects in materials and workmanship and is reported to Whirlpool within 30 days. Discoloration, rust, or oxidation of surfaces resulting from caustic or corrosive environments, including but not limited to, high salt concentrations, high moisture or humidity, or exposure to chemicals. Travel or transportation expenses for service in remote locations where an authorized Whirlpool servicer is not available. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WGD87HEDC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WGD87HEDC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.