User manual WHIRLPOOL WFG510S0AB INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WFG510S0AB. We hope that this WHIRLPOOL WFG510S0AB user guide will be useful to you.


WHIRLPOOL WFG510S0AB INSTALLATION GUIDE: Download the complete user guide (623 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WFG510S0AB DIMENSION GUIDE (111 ko)
   WHIRLPOOL WFG510S0AB USE & CARE GUIDE (478 ko)
   WHIRLPOOL WFG510S0AB WARRANTY INFORMATION (83 ko)

Manual abstract: user guide WHIRLPOOL WFG510S0ABINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Back Page Questions or for Service Call: 1-800-944-9044 (U. S. ) 1-800-668-4606 (Canada) READ AND SAVE THESE INSTRUCTIONS p/n 316417114 Rev A (0605) Welcome & Congratulations Congratulations on your purchase of a new range!At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible. We know you'll enjoy your new range and Thank You for choosing our product. We hope you consider us for future purchases. PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS This Use & Care Manual provides specific operating instructions for your model. [. . . ] Press the key pad once to choose the (Fahrenheit) °F mode; or press the key pad once to choose the (Celsius) °C mode. To accept the change, wait 5 more seconds until the oven control beeps once. If at any time during the process of changing the Temperature Display Mode (F or C ) you decide the change is not F desired, press the key pad before the oven control beeps once to cancel the process. 5. The display will then return to the time of day with any temperature display mode change you may have requested. 7 Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 500°F. The display will show "350°F. " By pressing and holding the or , 2. Within 5 seconds, press the the temperature can then be adjusted in 5°F increments. When the or is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the control will beep once. To cancel the baking function, press . To Change the Oven Temperature after Baking has Started: 1. or to increase or decrease the set temperature. 8 Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To Broil 1. If you want to keep the adjustment, wait until the display quits flashing and the oven control beeps once. The oven temperature adjustment has be accepted by the oven control and the display will return to the time of day. Notes: The oven temperature adjustment may be made if your oven control has been set to operate in the (Celsius) °C Temperature Display Mode. In this case each press of the or key will adjust in 1°C increments upward (maximum +18°C) or downward (maximum -18°C), depending on which arrow key pad is pressed. 10 General Care & Cleaning (Cleaning Chart) Surfaces Aluminum (Trim Pieces) & Vinyl Glass, Painted Plastic Body Parts & Control Knobs How to Clean Use hot, soapy water and a cloth. Dry with a clean cloth. For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. DO NOT use abrasive cleaners on any of these materials; they can scratch. Before cleaning the control panel, turn all controls to OFF and remove the control knobs. Squeeze excess water from the cloth before wiping the panel; especially when wiping around the controls. Excess water in or around the controls may cause damage to the appliance. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft, then push the knob(s) into place. Clean burner grates, broiler pan & insert in the dishwasher and dry upon removal. [. . . ] If the fault recurs, record fault number, press CLEAR/OFF & contact an authorized service agent. Oven control beeps and displays any "F" code error (for example F3; some models) - Electronic control has detected a fault condition. Allow the oven to preheat to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WFG510S0AB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WFG510S0AB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.