User manual WHIRLPOOL TGW 5466/IN/01 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL TGW 5466/IN/01. We hope that this WHIRLPOOL TGW 5466/IN/01 user guide will be useful to you.


WHIRLPOOL TGW 5466/IN/01 INSTRUCTION FOR USE: Download the complete user guide (128 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL TGW 5466/IN/01 MODE D'EMPLOI (135 ko)
   WHIRLPOOL TGW 5466/IN/01 KURZANLEITUNG (1332 ko)
   WHIRLPOOL TGW 5466/IN/01 BEDIENUNGSANLEITUNG (133 ko)
   WHIRLPOOL TGW 5466/IN/01 TABLEAU DE PROGRAMMES (1343 ko)
   WHIRLPOOL TGW 5466/IN/01 PROGRAM CHART (1327 ko)
   WHIRLPOOL TGW 5466/IN/01 BEDIENUNGSANLEITUNG (133 ko)

Manual abstract: user guide WHIRLPOOL TGW 5466/IN/01INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] This panel must be positioned at a maximum distance of 150 mm below the upper surface of the work surface but, in no case less than 20 mm from the bottom of the hob. In the case that you intend to install an oven beneath the hob, make sure that it is manufactured by Whirlpool and equipped with a cooling system. The manufacturer declines all liability if another brand oven is installed beneath the hob. Before installation, make sure that: - the local gas delivery conditions (nature and pressure) are compatible with the settings of the hob (see the rating plate and injector table); - the outer surfaces of the furniture or appliances adjacent to the hob are heat resistant according to local regulations; - this appliance is not connected to a fume exhaust device. [. . . ] - The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply. - If necessary, the electrical power cable must be replaced exclusively with a power cable having identical characteristics to the original supplied by manufacturer (type H05V2V2-F 90°C or H05RR-F). - The manufacturer cannot be held responsible for any injury to persons or animals or damage to property arising from failure to comply with these requirements. - The electrical components must not be accessible to the user after installation. - Do not touch the appliance with any wet part of the body and do not operate it when barefoot. - This hob (class 3) is designed solely for private household use for cooking food. Doing so may result in carbon monoxide poisoning and overheating of the hob. The Manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls. - The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or with lack of experience and knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety. - Young children should be kept away from the appliance and supervised to ensure that they do not play with it. GAS CONNECTION WARNING • • This operation must be performed by a qualified technician. The gas supply system must comply with local regulations. You can find specific local regulations for some countries in the paragraph “Reference to Local Regulations”. • The gas nozzles must be changed by After Sales Service or a qualified technician. • Nozzles not supplied with the appliance must be ordered from After Sales Service. NOTE: when liquid petroleum gas is used (G30/G31), the minimum gas setting screw must be tightened as far as it will go. IMPORTANT: should you experience difficulty in turning the burners knobs, please contact the After Sales Service for the replacement of the burner tap if found to be faulty. TROUBLESHOOTING GUIDE If the hob will not operate correctly, before calling the After-Sales Service, refer to the Troubleshooting Guide to determine the problem. The burner fails to ignite or the flame is not even Check that: • The gas or electrical supplies are not shut off and especially that the gas supply tap is open. The burner does not stay lit Check that: • When lighting the burner, the knob has been pressed for enough time to activate the protection device. The containers are not stable Check that: • The bottom of the container is perfectly flat • The container is centered on the burner. If after the above checks the fault still occurs, get in touch with the nearest After Sales Service. • DECLARATION OF CONFORMITY This hob has been designed, constructed and marketed in compliance with: - safety requirements of “Gas” Directive 2009/142/EC (ex: EEC 90/396); - safety objectives of the “Low Voltage” Directive 2006/95/EC (which replaces 73/23/EEC and subsequent amendments); - protection requirements of EEC Directive “EMC” 2004/108/EC. This hob is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. 1935/2004. • SAFEGUARDING THE ENVIRONMENT Disposal of packing material The packing material is 100% recyclable and is marked with the recycle symbol ( ). [. . . ] Stainless steel surfaces may be stained by calcareous water or aggressive detergents if left in contact for too long. Any food spills (water, sauce, coffee, etc. ) should be wiped away before they dry. Clean with warm water and neutral detergent, and then dry with a soft cloth or chamois. Remove baked-on dirt with specific cleaners for stainless steel surfaces. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL TGW 5466/IN/01




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL TGW 5466/IN/01 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.