User manual WHARFEDALE ACHROMATIC LCR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHARFEDALE ACHROMATIC LCR. We hope that this WHARFEDALE ACHROMATIC LCR user guide will be useful to you.


WHARFEDALE ACHROMATIC LCR : Download the complete user guide (2370 Ko)

You may also download the following manuals related to this product:

   WHARFEDALE ACHROMATIC LCR BROCHURE (1055 ko)

Manual abstract: user guide WHARFEDALE ACHROMATIC LCR

Detailed instructions for use are in the User's Guide.

[. . . ] Achromatic LCR Manual V0-1. pdf 2009-10-27 17:51:54 C M Y CM MY CY CMY K POSITIONING THE LOUDSPEAKERS Before connecting your system consider where you will place the speakers in the room. This is particularly important if you are wall mounting the loudspeaker. 1. 8-2. 5 metres WALL MOUNTING If you are wall mounting the loudspeaker we recommend it is mounted as shown. [. . . ] After connection they can be re-installed on the wall. b 6. 0mm c e d No 8 x 40mm 5mm 800. 00 mm - + - + - + 3 CONNECTING YOUR LOUDSPEAKERS - 1 TERMINAL PANELS Each of the three loudspeakers connects to the amplifier via a twin terminal connecting panel. The positive (+) terminal is located at the right of the panel and is coded Red. Carefully strip the insulation from each end, leaving about 8mm of bare wire. Audio cable is polarised, with two cores of different colours, or often a coloured tracer or identification rib. We suggest that you connect the coloured/striped wire to the RED, Postive terminals of your AV amplifier. This will ensure that all the loudspeakers are connected the correct way round and avoid set-up problems. Thread the bared end of each cable through the hole in the bottom of the terminal post. Ensure that there are no loose strands which may touch adjacent terminals. AMPLIFIER - SPEAKER CONNECTIONS Connect each loudspeaker to the correct channel of your AV amplifier or processor taking care to connect the Red, Positive (+) terminal of the speaker to the Red, Positive (+) terminal of the speaker output terminal of the amplifier, and similarly with the Black, Negative (­) terminal. CONNECTING A WALL MOUNTED ACHROMATIC LCR 1: Mark each speaker cable for easy identification 2: Run the cables from the amplifier to the speaker location. [. . . ] Poor localisation of dialogue System level too high; Objects on speakers/subwoofer; Objects too close to subwoofer Rear/surround/sub channels enabled when the Achromatic LCR is in stand alone mode. (Read the manual for correct connection procedure) 6 Achromatic LCR Manual V0-12. pdf 2009-10-27 17:49:20 C M Y CM MY CY CMY K [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHARFEDALE ACHROMATIC LCR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHARFEDALE ACHROMATIC LCR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.