User manual WESTERN DIGITAL WD40000A4NC

[. . . ] WD ShareSpace Network Storage System User Guide TM Important Safety Instructions 1. Do not block the slots and openings on the back or bottom side of the chassis; to ensure proper ventilation and reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Operate this product only from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. [. . . ] If a new firmware file is available, download it from support. wdc. com. The web user interface redirects to the System Information page after the update is completed. Note: If the IP address of your unit has changed, you will need to use WD Discovery Tool to discover it again. NETWORK STORAGE MANAGER: ADVANCED - 85 WD SHARESPACE USER MANUAL Configuration The Configuration icon allows you to save or restore system configuration settings or revert to factory default settings. To back up the current system configuration settings: 1. On the Restore Configuration page, click Save Current Configuration. 2. Selecting General Restore will restore all features to previously saved settings (data volume and shares settings excepted). Click OK. NETWORK STORAGE MANAGER: ADVANCED - 86 WD SHARESPACE USER MANUAL To restore the device to factory defaults: Important: Save the current configuration prior to restoring the factory default settings. Performing a factory default reset will erase all settings in the network storage system. System configuration will reset the device to default factory settings. After the reset, the administrator login/password will be changed to "admin/admin. " 1. During the system restore process, the system will turn off the power LED and blink the backup LED. Wait until the system restore process is completed. Note: You cannot access the configuration web pages if you forget the administrator password, IP address setting, or device name. Use the reset button to restore these settings (including IP setting, device name, and administrator password) to factory default configuration. To use this function, press and hold the reset button on the back of the device (next to power interface) for at least 10 seconds. The system reboots automatically and you can then use the default settings to access the device. Advanced The Advanced icon on the System tab allows you to configure the device's identification LED and configure the system for a secure connection by generating a key and an SSL certificate. You can also set the extend Span mode and enable HDD standby mode. NETWORK STORAGE MANAGER: ADVANCED - 87 WD SHARESPACE USER MANUAL To turn on the system identification LED: System Identification identifies the location of the device. If you have multiple devices installed, you can use this function to turn on the identification LED and know which device you are configuring. Click ON to enable the system identification LED. To generate an SSL certificate and key pair automatically: 1. Enter the identification information you want to include in the certificate/key pair. Click Submit. To generate an SSL certificate and key pair manually: 1. Using your preferred method, generate an RSA private key and paste it in the appropriate fields. Select Auto Extend or Manual (Extend Disk) Mode: Auto Extend only applies when RAID type is Span. It will extend an existing Span automatically when you add a new drive and reboot the system. Click Submit. NETWORK STORAGE MANAGER: ADVANCED - 88 WD SHARESPACE USER MANUAL To enable HDD standby: If the HDD Standby function is enabled, the hard drives go into standby mode to save power after a fixed period of no activity. [. . . ] This product is intended to be supplied by a listed limited power source, double insulated, or direct plug-in power unit marked "Class 2. " CE Compliance for Europe Verified to comply with EN55022 for RF emission; EN-55024 for Generic Immunity, as applicable; and EN-60950 for Safety. APPENDIX - 149 WD SHARESPACE USER MANUAL Environmental Compliance (China) Warranty Information Obtaining Service WD values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support website at support. wdc. com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i. e. , one for which an RMA number has not been issued) will be returned to you at your expense. [. . . ]