User manual WESPRO DC8366

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording. When recording a video clip, the flash cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected size, and then the video recording will stop. In this case, select a video size lower than the current one. Playing Back Video Clips You can play back recorded video clips on the camera. A press of the / buttons during playback allows fast forward play / fast reverse play. To cancel pause, press the SCN/SET button again. Video clips cannot be displayed rotated or enlarged. This camera does not have a built-in speaker so that you can not play back sound with the camera. To play the video clip back on your computer, you may use either Windows Media Player or Apple "QuickTime Player". QuickTime basic player is available free of charge, compatible with Mac and Windows-computers and can be downloaded from the Apple web site at www. apple. com. For help using QuickTime Player usage, please refer to the QuickTime on-line help for more information. EN-16 PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. The images can be displayed in reverse or forward sequence with the / buttons. To return to normal magnification, press the button. x1. 5 An [S] icon is displayed with the video data. Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. Images that have been selected with the / / / buttons will be indicated by a yellow frame. When there are ten or more images, scroll the screen with the / buttons. Press the / / / buttons to select the image to be displayed at regular size. The selected image is displayed at its regular size. In the 9-thumbnail mode, an [z], [S] icon may be displayed in a thumbnail. EN-17 MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. Capture Capture Function Size Quality Color W. Balance ( Manual WB ISO MENU:Exit 8M Normal Normal Auto Next Menu Auto SET:Adj. W Metering Average A Sharpness Normal Saturation Normal CaptureMd. Press the MENU button, and select the [Capture] / [Function] menu with the / button. Select the desired option item with the / buttons, and press the SCN/SET button to enter its respective menu. Select the desired setting with the / buttons, and press the SCN/SET button. * [8M] 8M (3264 x 2448 pixels) * [6M] 6M (2816 x 2112 pixels) * [4M] 4M (2272 x 1704 pixels) * [2M] 2M (1600 x 1200 pixels) * [0. 3M] 0. 3M (640 x 480 pixels) Quality This sets the quality (compression) at which the image is captured. *[ ] Fine *[ ] Normal ] Economy *[ Color This sets the color of the image that will be captured. Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. [. . . ] If you select [Images] in the previous step, the figure Images shown on the right hand side will appear. Select Single Next Menu [Single], [All] with the / buttons, and press the All Next Menu SCN/SET button. If you select [Single] in the previous step, the figure shown on the right hand side will appear. SET:Enter Select the [Print Num] (up to 99) with the / Single buttons. [. . . ]