User manual WAVECOM W61PC DECODER VERSION 6.6.5.0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WAVECOM W61PC. We hope that this WAVECOM W61PC user guide will be useful to you.


WAVECOM W61PC DECODER VERSION 6.6.5.0: Download the complete user guide (8947 Ko)

You may also download the following manuals related to this product:

   WAVECOM W61PC DECODER VERSION 6.6.60 (7835 ko)

Manual abstract: user guide WAVECOM W61PCDECODER VERSION 6.6.5.0

Detailed instructions for use are in the User's Guide.

[. . . ] Manual V6. 6. 5. 0 WAVECOM Decoder by WAVECOM ELEKTRONIK AG PUBLISHED BY WAVECOM ELEKTRONIK AG Hammerstrasse 8 CH-8180 Buelach Switzerland Phone Fax Email: Internet: +41-44-872 70 60 +41-44-872 70 66 info@wavecom. ch http://www. wavecom. ch © by WAVECOM ELEKTRONIK AG. Reproduction in whole or in part in any form is prohibited without written consent of the copyright owner. The publication of information in this document does not imply freedom from patent or other protective rights of WAVECOM ELEKTRONIK AG or others. All brand names in this document are trademarks or registered trademarks of their owners. [. . . ] Four coding levels (called RS Efficiency) are specified, which allow for more or less error correction within a block. The percentages in the following list of coding levels, relate the number of information symbols (user data) to the block length, a block comprises user data and parity check symbols: ROBUST: 60% NORMAL: 75% FAST: 90% OFF: 100% (i. e. , no error correction) The level of RS Efficiency is automatically detected by the demodulator. After successful synchronization, it may take several tens of seconds before any text is output in the GUI. 114 Transmission Modes Manual V6. 6. 5. 0 WAVECOM Decoder CODAN Parameter Frequency range System Speed Modulation Receiver settings Input(s) Additional Info Value HF FSK, Digital Selcal 100. 0 Baud FSK DATA, CW, LSB or USB AF-IN, IF-IN-VAR, IF-IN-10. 7 or IF-IN-21. 4 ITU R M. 493 alphabet CODAN SELCAL operates with 100. 0 baud and can be started by selecting the mode. A preamble of at least 100 dot reversals which are 50 changes between "0" and "1" (low and high bit) precedes the data block. Digital MARK "1" is represented by a frequency of 1870 Hz and SPACE by 1700 Hz. The dot pattern is followed by a word synchronization sequence called the "phasing preamble". This sequence is followed by the data block with different control characters and the message. Selecting Options/Display offers the option of an ASCII or RAW bits display. CODAN-9001(Option) Parameter Frequency range System Center frequency Shift/Bandwidth Speed Modulation Receiver settings Input(s) Additional Info Value HF Half-duplex asynchronous adaptive ARQ In the range (-3100, 3100) [Hz]; automatic frequency control (AFC): +/-37. 5 Hz N/A 16 x 75 Baud Differential PSK4A; 16 tones DATA, CW, LSB or USB AF-IN, IF-IN-VAR, IF-IN-10. 7 or IF-IN-21. 4 Optional Mode ITA-5 CODAN-9001 is an asynchronous adaptive ARQ system. The modulation type is differential quaternary phaseshift keying (differential PSK4A). The demodulator output consists of a bit-stream that may have been derandomized if desired. In such a case, the required derandomization sequence is generated by a linear shift register (LSR) comprising 27 stages. The user can specify a 27-digit combination of 0s and 1s to be used for the initialization of the LSR. Alternatively, the initialization pattern can be determined automatically from the signal at hand. All options related to derandomization and initialization of the LSR can be set in the dialog "CODAN-9001 Options" (see below) which is accessed via "Options, CODAN-9001 Options. . . " Manual V6. 6. 5. 0 WAVECOM Decoder Transmission Modes 115 A bit-error rate (BER) measurement is performed, and the BER is displayed in the status line. Two different ways of BER measurement are available: BER is determined by considering only preamble- and sync-blocks BER is determined by considering preamble-, sync-, RQ-, and data-blocks After successful synchronization, it may take several tens of seconds before the bit-stream (in hexadecimal format) is output in the GUI. The output data can be displayed in one of two available formats: "BINARY" (0s and 1s) or "HEX" (hexadecimal numbers). The selection of the desired output format can be performed in the dialog "Display", which is accessed via "Options, Display. . . " XX screen shot The user can specify the polarity of the received signal, i. e. NOR(mal) or INV(erse). COQUELET-8 Parameter Frequency range System Speed Modulation Receiver settings Input(s) Additional Info Value HF MFSK, Simplex 37. 5, 50. 0 or 75. 0 ms MFSK DATA, CW, LSB or USB AF-IN, IF-IN-VAR, IF-IN-10. 7 or IF-IN-21. 4 ITA-2 COQUELET-8 is a MFSK (Multiple Frequency Shift Keying) system and like the PICCOLO system translates an ITA-2 character into a sequence of two tones. The first group of tones contains 8 tones (1 - 8) and the second group the tones 5 - 8. Coquelet-8 is a synchronous system with a tone duration of 75. 0 ms, 50. 0 ms or 37. 5 ms. One ITA-2 character is transmitted in 75 or 150 ms, which is equivalent to 50 or 100 Baud Baudot with 1. 5 stop bit (codeword length 7. 5 Bit). Transmissions start with a synchronization preamble, and end with several EOT characters. [. . . ] 47 ACARS 95 Add a new Soundcard Custom Input 44 Add a new TCP/IP Custom Input 45 Add a new WAV-File Custom Input 42 Additional Functions 201 Adjustment of the Translation Frequency 53 AIS 97 Alarm Monitor 204 ALF-RDS 97 ALIS 98 ALIS-2 98 Alphabet. . . 35 Alphabets 261 Alphabets Details 217 AM 29 AMSAT-P3D 99 Analysis DIRECT Modes in the VHF/UHF Menu 28 Analysis INDIRECT Modes in the VHF/UHF Menu 27 Analysis Modes in the HF Menu 25 Antenna installation 237 Appendix 217 Application Notes 230 ARQ6-90 and ARQ6-98 103 ARQ-E 100 ARQ-E3 101 ARQ-M2-342 and ARQ-M2-242 102 ARQ-M4-342 and ARQ-M4-242 102 ARQ-N 101 ASCII 103 ASK (Amplitude Shift Keying) 90 ATIS 104 AUM-13 100 Auto 29 AUTOCORRELATION 76 AUTOSPEC 104 BR6028 29 Broadcast Channel Information 179 BULG-ASCII 108 Button Bars 47 C Cancellation 239 Card Information 202 CCIR 109 CCITT 109 Center. . . 33 Changes of Order Quantities 239 Channel coding 87 CHU 110 CIS-11 111 CIS-12 111 CIS-14 112 CIS-36 112 CIS-36-50 113 CIS-50-50 113 Classifier (Option) 72 Classifier data 225 ClassifierCodeCheck data 226 Clear Screen 37 CLOVER-2 (Option) 113 CLOVER2/2000, PACTOR3, CODAN9001 267 CLOVER-2000 (Option) 114 CmStick 7 CODAN 115 CODAN-9001(Option) 115 Code Statistic 82 Code Statistic. . . 35 CodeMeter and CmStick 243 CodeMeter Control Center 243 CodeMeter Events 244 CodeMeter File 244 CodeMeter Hardware 243 CodeMeter Licensing 244 CodeMeter Process 245 CodeMeter View 245 CodeMeter WebAdmin 246 CodeMeter WebAdmin Configuration 251 CodeMeter WebAdmin Content 246 CodeMeter WebAdmin Diagnosis 254 CodeMeter WebAdmin Home 246 CodeMeter WebAdmin Info 255 CodeMeter WebAdmin Server 249 Codes 257 Command Line Parameters 22 Company Profile 2 Conditions of Sale 238 Conformity of W61LAN 241 Conformity of W61PC 240 Connecting to a W61PC Card 10 Contents 46 Copyright 239 COQUELET-13 117 COQUELET-8 116 COQUELET-80 118 CTCSS 118 Custom Inputs and Streaming 41 Custom Inputs. . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WAVECOM W61PC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WAVECOM W61PC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.