User manual VTECH VT 5850

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool). Slots and openings in the Handset and Base Unit are provided for ventilation. To protect it from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. [. . . ] The system plays back your recorded message. Review Your Announcement: 1. The system plays the current announcement. Delete Your Announcement: Press DELETE during announcement playback. The system will use the pre-recorded announcement until you record a new one. Answering System Feature Setup You can set up one feature at a time, or you can set up a feature and then move on to set up another feature. 1. Press and release MENU until you hear the system announce the feature you want to set. Refer to Feature Summary on page 26 for a description of the features and your choices. Press TIME/SET to confirm your selection. 25 Answering System Operation Answering System Operation FEATURE SUMMARY SYSTEM ANNOUNCES: "Set Security Code" 50* (Default setting indicated by "*") DESCRIPTION/DIRECTIONS: Set the remote access code you will use to access features and functions of the answering system from a touch tone phone. When Message Alert is turned on the Base beeps once every 10 seconds when new messages have been received. When you turn Announce Only on, callers hear your announcement but cannot leave a message. Turn the Base ringer on or off. "Set Audible Message Alert" Off* On "Set Announce Only" Off* On "Set Base Ringer" On* Off "Set Number of Rings" 2 4* 6 Toll Saver Answering System Operation Choose how many times the phone will ring before the system answers a call. With Toll Saver active, the system answers after two rings when you have new messages and after four rings when you have no new messages. NOTE: Exit Feature Setup at any time by pressing any PLAY/STOP button. 26 Answering System Operation This system automatically saves your messages until you delete them, and can store approximately 15 minutes of messages, memos and announcements (up to a maximum of 99 messages). If the system has less than 30 seconds of recording time left, it automatically turns off. The system will still answer after 10 rings, announce "Memory full, please enter your security code" and wait for the caller to enter the code to access remote functions. (See Remote Access beginning on page 31 for details. ) When you have new messages or memos, the PLAY/STOP light for each mailbox with new messages will flash. Listen to Messages Before each message or memo plays, the system announces the day and time it was received. While a message plays, the message window displays the number of that message. If you press REPEAT/SLOW twice in the first two seconds of a message, the system will backup to replay the previous message. Press and hold SKIP/QUICK or REPEAT/ SLOW during message playback to speed up or slow down playback of a message. After playing the last message in a mailbox, the system announces "End of messages. " If the system has less than five minutes of recording time left, it announces the remaining time. 27 Answering System Operation A Mailbox key will flash if you have new messages. The system announces the mailbox number, the number of new messages and the number of old messages. After all new messages are played, press the PLAY/STOP button again to hear all (old) messages. Answering System Operation Press the PLAY/STOP button at any time during playback to exit message playback. You will hear a long beep. Adjust Playback Volume Press VOL or VOL to adjust playback volume to a comfortable level. If volume is set to level 1, you will not hear incoming messages as they are received. Answering System Operation The system beeps three times when you reach the highest or lowest volume setting. Delete Messages NOTE: Deleted messages cannot be recovered. Delete a Specific Message Press DELETE while a message is playing to delete only that message. Delete All Old Messages in a Mailbox Press DELETE. The system announces, "Please select mailbox. " Press the desired PLAY/STOP button. [. . . ] The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. 41 Additional Information FCC, ACTA and IC Regulations Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is 0. 1. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. [. . . ]