User manual VTECH SBC2432

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool). Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked by placing the product on the bed, sofa, rug, or other similar surface. [. . . ] The Base will emit a happy tone and the Power and Line In Use LEDs will flash rapidly. After each key press, the Base will emit a 1-second preview of the selected ringer. To exit without saving press . *** Basic Operation · · * Select Tone / Pulse: · · · · · The phone must be off. The Base will emit a happy tone and the Power and Line In Use LEDs will flash rapidly. The Line In Use LED will toggle ON when TONE is selected and OFF when PULSE is selected. To exit without saving press . *** * Select Base Ringer Volume and OFF: · · · · · · The phone must be off. The Base will emit a happy tone and the Power and Line In Use LEDs will flash rapidly. Press the volume up and down keys ( / ) to adjust the Base Ringer volume. After each press of the volume keys, the Base will emit the selected Ringer and volume setting for one second. To turn the Base ringer OFF, press the volume down key ( ) until no ringer preview is played. To exit without saving press . *** * 24 Handset and Base Operation Making Calls From the Handset · Press ON (or, HANDSFREE to use the Handset Speakerphone feature). Dial the phone number. -OR· · Dial the phone number first; then press ON (or HANDSFREE). Press OFF to end your call. Answering Calls From the Handset · · Press any key except OFF and the softkey. Press OFF to end your call. Making Calls From the Base Unit · · Press SPEAKERPHONE. Press SPEAKERPHONE to end your call. Answering Calls From the Base Unit Redial from Base Unit · · Press SPEAKERPHONE. Press SPEAKERPHONE to end your call. · · Pressing REDIAL will immediately dial the last number in the base unit redial memory. Hold down the REDIAL key for more than 2 seconds to erase the contents in redial memory. This is to prevent the accidental dialing of the number stored in redial memory. 25 Advanced Operations Handset and Base Operation Mute Function During an active call pressing either the MUTE soft key on the Handset or the MUTE key on the Base (when in speakerphone mode), will disable the microphone. Press MUTE key again to return to normal 2-way conversation. Hold Function From the Handset : · Press the HOLD soft key to place a call on hold. From the Base : · During an active call, press the HOLD key to place a call on hold. · To return to the call press either HOLD or SPEAKERPHONE. Advanced Operations Flash Function You can use your GIGAPHONE with services such as Call Waiting. Simply press the ON key on the Handset or the FLASH key on the Base (when in speakerphone mode) to FLASH the line. Volume Control From the Handset : During an active call press the VOLUME soft key, then use the AAAAUp and DOWN soft keys to adjust the earpiece volume. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 38 Additional Information FCC Regulations FCC Part 68 The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular telephone jack (USOC RJ11C, RJ11W or RJ14). [. . . ]