User manual VTECH I6764

[. . . ] Before using this telephone, you must read the Important safety instructions on page 33 of this manual. NEED HELP? This manual has all the feature operations and troubleshooting you need to install and operate your new VTech telephone. Please take the time to review thoroughly to ensure proper installation of this VTech innovative and feature rich product. You can also visit our website at www. vtechphones. com for support, shopping, and everything new at VTech. In Canada, dial (800) 267-7377 Table of contents Parts checklist . [. . . ] (Maximum length of announcement is 90 seconds. ) Length of recording is more than 99 seconds. System is in programming mode or initializing. Counting 1 to 99 99 (Flashing) 1-99 (Flashing) 1-8 (Steady for one second) 40-99 A On or Off (Steady for one second) CL -- (Steady) -- (Flashing) (Normal display) Answering system operation 30 Answering system operation Remote access You can access many features of this system remotely from a touch tone phone. When the system answers, enter your remote access code (preset to 50). The system beeps once and announces the number of new messages on the system. Press * 0 to exit remote operation. Voice menu The system has voice prompts to help you with remote operation. Press * 5 to hear the menu while remotely connected to the answering system. Remote access commands Function: Play messages in a mailbox Press #, then the desired mailbox number (1, 2 or 3). Press #4 while message is playing; press Repeat a message #4 twice to back up previous message. Skip a message Press #6 while message is playing; each press advances next message. Record announcement Press 7; after beep, record announcement, press * #5 to stop. Press 8, then the mailbox number where Record memo * you want memo recorded; speak after the (If accessing from a touch system announces "Record after the tone. tone telephone, press #5 to Press MAILBOX when you are done. " stop recording. ) Press #5 to stop. End remote access call * Press #0; the system announces, Turn system off "Answering machine off. " Press #0 again to turn the system back on. When system is off, it answers after 0 Turn system on rings and announces, "Please enter your remote access code. " Enter your remote access code. NOTE: If no key is pressed within 0 seconds of entering remote access, the voice menu will be announced. After the voice menu announcement, if no key is pressed within 20 seconds, the remote access call will automatically end. Command: 3 Answering system operation Headset operation Your phone handset is equipped with a 2. 5mm headset jack for use with an optional accessory headset for handsfree operation. If you choose to use the headset option, you must obtain an optional accessory headset that is compatible with the phone. To purchase a headset, visit us on the web at www vtechphones com or call VTech Customer Service at 1-800-595-9511 In Canada, call VTech Telecommunications Canada Ltd at 1-800-267-7377 Once you have a compatible 2. 5mm headset, locate the headset jack on the side of the phone's handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on the handset. NOTE: Whenever a compatible headset is connected to the cordless handset, the microphone on the handset will be muted. This is done to limit the effect of background noise. Advanced operation Belt clip Your phone is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the handset. Do not force the connection. 32 Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: . [. . . ] In most, but not all areas, the sum of all RENs should be five (5. 0) or less. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does 4 Additional Information FCC, ACTA and IC Regulations not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. [. . . ]