User manual VTECH E2811

[. . . ] User's manual E2811 2. 4 GHz cordless telephone/ answering system with caller ID/call waiting FLASH CLEAR TONE MUTE REDIAL PAUSE DELETE Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 50-52 of this manual. Please thoroughly read the user's manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] To play back a memo Press PLAY/STOP to hear messages and memos (see page 34 for other options). Elapsed recording time (seconds). Press to stop recording. Press STOP when you are done. " 1. 2. Speak into microphone. Microphone 3. PLAY/STOP "Recorded" the memo has been recorded. 35 Answering system operation Message counter displays The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter Message counter displays 0 0 (flashing) 1-99 1-99 (flashing) No messages. Total number of messages and memos, or message number currently playing. If the telephone loses power, after power is restored, the number in the message counter will flash to indicate the clock needs to be set. 10-99 1-99 (counting) Current remote access code while setting (page 33). Elapsed time while recording a memo (page 35) or announcement up to 90 seconds (page 32). Memo recording time has exceeded the maximum counter capacity of 99 seconds. System is answering a call, being accessed remotely, or the clock is being set. Displayed for two seconds while telephone base speaker volume being adjusted. Displayed for two seconds while telephone base ringer volume being adjusted. 99 (flashing) F (flashing) -- -- (flashing) 02, 04, 06, tS 1-8 HI, LO, OF 36 Answering system operation Answering system mode The answering system's default factory setting is ON in order to answer and record messages. You can turn the answering system off, but if you do so, the answering system will not answer calls or record incoming messages. 1. ANSWER ON until the system announces "Calls will not be answered. " To turn the answering system off Press ANSWER ON until you hear "Calls will not be answered" and a confirmation beep. The ANSWER ON light will be turned off. NOTE: If the answering system is off and someone calls, the telephone will ring 10 times then answer and announce "Please enter your remote access code. " Enter your remote access code to enter remote access mode (page 38). If you do not enter the correct remote access code, the call will be ended automatically. 2. "Beep, " The system has been turned off. - OR To turn the answering system on 1. ANSWER ON until the system announces "Calls will be answered. " Calls . " Press ANSWER ON until you hear "Calls will be answered" then a beep to confirm the ON setting. Call screening If the answering system is on and the base speaker volume is not off, you will hear the announcement and the incoming message when a call comes in. 2. "Beep. " The system has been turned on. Call intercept While you are call screening, you can intercept the call by pressing PHONE/FLASH or SPEAKER on the handset. 37 Answering system operation Remote access 1. When system answers, enter two digit remote access code (19 unless you have changed it). Hang up to end call and save all undeleted messages. A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 33) to change it. Play all messages Press to hear all messages. 3. 4. 1 Play new messages 2 Delete message(s) Press to hear new messages. Press during the beginning of the day and time announcement to go back to the previous message. Press 8 or hang up to end the remote access call. 3 33 Repeat or go back 4 Stop 5 NOTE: · If there are many old messages in the mailbox, pressing 3 twice to delete all old messages may take up to 20 seconds. You will hear one beep every one second to alert you that the answering system is deleting the messages. [. . . ] NOTE: Before calling for service, please review the user's manual - a check of the PRODUCT controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you, transportation, delivery or handling charges prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. [. . . ]