User manual VTECH E2801

[. . . ] User's manual E2801 2. 4 GHz cordless telephone with caller ID/call waiting Congratulations on purchasing your new AT&T product Before using this AT&T product, please read the Important safety instructions on pages 40-42 of this manual. Please thoroughly read the user's manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Model #: Type: Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: E2801 2. 4GHz cordless telephone © 2007 Advanced American Telephones. [. . . ] (requires voicemail service from your local telephone company). On when speakerphone is in use. SPEAKER 30 Appendix Handset display screen messages Screen display messages XX MISSED CALLS ALREADY SAVED CALL LOG EMPTY CHARGING CHECK BATTERY!The handset with a low battery has been placed to charge in the telephone base. The battery is not installed or not installed properly in the handset. -OR-OR- The battery needs to be replaced. Use only the supplied rechargeable battery or replacement battery (model 27910, part number 89-0099-00-00) or equivalent. To order a replacement battery, visit our website at www. telephones. att. com or call 1 (800) 222-3111. DIRECTORY EMPTY DIRECTORY FULL ENDED INCOMING CALL LINE IN USE The handset has lost connection with the telephone base. Another telephone on the same line is in use. 31 Appendix Handset display screen messages Screen display messages LOW BATTERY MICROPHONE ON MICROPHONE MUTED NEW VOICE MAIL NO LINE The battery needs to be recharged. MUTE has been turned off and the person on the other end can hear you. During a call, the handset is no longer connected with the telephone base. The handset speakerphone is on. NO SIGNAL and then CALL ENDED PAGING FROM BASE PHONE PLACE IN CHARGER SAVED SPEAKER 32 Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www. telephones. att. com or call 1 (800) 222-3111. · Make sure the battery is installed and charged correctly (page 7). For optimum daily performance, return the cordless handset to the telephone base after use. · Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch. · Make sure the telephone line cord is plugged firmly into the telephone base and the modular wall jack. Allow up to one minute for the cordless handset and base to synchronize. · Charge the battery in the cordless handset for at least 16 hours. If that still does not work, it may be necessary to purchase a new battery. Please refer to the Battery installation & charging section of this user's manual (page 7). · Disconnect the telephone base from the telephone line wall jack and plug in a working telephone. If this telephone does not work, the problem is probably in the wiring or the local service. · Disconnect the telephone base from the telephone jack and connect a different telephone. [. . . ] If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original oneyear limited warranty; whichever is longer. 46 Appendix Limited warranty 4. This limited warranty does not cover: · PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or · PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or · PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or · PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or · PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or · PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or · PRODUCT returned without valid proof of purchase (see item 6 below); or · Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service? To obtain warranty service in the United States of America visit www. telephones. att. com or call 1(800) 222-3111. NOTE: Before calling for service, please review the user's manual - a check of the PRODUCT controls and features may save you a service call. [. . . ]