User manual VTECH DS6151

[. . . ] c o m Model: DS6151 Congratulations on purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 81 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. [. . . ] Press OFF on the handset or CANCEL on the telephone base to exit to the previous menu. Delete a speed dial entry You can delete a speed dial entry using a handset or the telephone base. Search for the desired entry in the speed dial directory (see Review the speed dial directory on page 51). The screen then shows the speed dial directory. 53 Telephone operation About caller ID This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller's number, or the caller's name and number that are sent by the telephone service provider after the first or second ring. Information about caller ID with call waiting Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even while on another call. It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if: · You have both caller ID and call waiting, but as separate services (you may need to combine these services). · You have only caller ID service, or only call waiting service. This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date are sent by the telephone service provider along with the call information. To view call log entries with numbers between 16 and 24 digits, you must save the entry to the directory (see page 58). You can use this product with regular caller ID service, or you can use this product's other features without subscribing to either caller ID or combined caller ID with call waiting service. 54 Telephone operation Caller ID history If you subscribe to caller ID service provided by your telephone service provider, information about each caller will appear after the first or second ring. If you answer a call before the caller information appears on the screen, it is not saved in the call log. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the phone number has more than 15 digits, only the last 15 digits appear. If the name has more than 15 characters, only the first 15 characters are shown and saved in the call log. · You can review, redial, and copy an entry into the directory. · When the call log is full, the oldest entry is deleted to make room for new incoming call information. · L1)X Missed and/or L2)X Missed displays when there are new call log entries (including missed and unreviewed calls). · Call log empty shows when there are no records in the call log. · Only one handset or the telephone base can review the call log at a time. If a handset tries to enter the call log while another handset or the telephone base is already in it, its screen shows Not available at this time. If the phone number has more than 24 digits, it will not be saved or shown in the call log. Missed calls indicator When there are unreviewed calls in the call log, the corresponding line message, L1)X Missed or L2)X Missed, shows on the handset and the telephone base. Each time you review a call log entry marked NEW, the number of missed calls decreases by one. [. . . ] In most, but not all areas, the sum of all RENs should be five (5. 0) or less. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. [. . . ]