User manual VTECH DS6111

[. . . ] User's manual www. vtechphones. com Model: DS6111 on purchasng your new VTech product. Before usng ths telephone, please read the Important safety instructions on page 34 of ths manual. Ths manual has all the feature operatons and troubleshootng necessary to nstall and operate your new VTech telephone. Please revew ths manual thoroughly to ensure proper nstallaton and operaton of ths nnovatve and feature rch VTech product. For support, shoppng, and everythng new at VTech, vst our webste at www. vtechphones. com. [. . . ] For Customer Service, visit our webste at www. vtechphones. com, or call 1 (800) 595-9511; n Canada, call 1 (800) 267-7377. Problem My telephone does not work at all. Suggeston · Make sure the battery s nstalled and charged correctly (page 3). For optmum daly performance, return the handset to the telephone base after use. · Make sure the power adapter s securely plugged nto an outlet not controlled by a wall swtch. · Make sure the telephone line cord is plugged firmly into the telephone base and the telephone wall jack. Allow up to one mnute for the cordless handset and telephone base to synchronze. If that stll does not work, t may be necessary to purchase a new battery. · Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem s probably n the wrng or the local servce. Call the local telephone company. L O W B AT T E RY s · Place the handset n the telephone base for rechargng. · Remove and re-nstall the battery and use t normally untl fully dscharged, then recharge the handset on the telephone base for up to 16 hours. · If the above measures do not correct the problem, the battery may need to be replaced. Appendix www. vtechphones. com 35 Troubleshooting Problem The battery does not charge n the handset or the handset battery does not accept charge. Suggeston · Make sure the handset s placed n the telephone base correctly. · Remove and renstall the battery, then charge for up to 16 hours. · If the handset s n the telephone base but the CHARGE lght on the handset s not on, refer to The CHARGE light is off n ths secton. Please refer to the Battery secton (page 33) of ths user's manual. Please refer to the Warranty secton (page 45) of ths user's manual for further nstructon. · Clean the chargng contacts on the handset and telephone base each month usng a pencl eraser or a dry non-abrasve fabrc. · Make sure the power adapter and telephone lne cord are plugged n correctly and securely. Please refer to the Warranty secton (page 45) of ths user's manual for further nstructon. · · · · Frst, try all the above suggestons. Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there s no dal tone on ths telephone ether, the problem s n your wrng or local servce. [. . . ] In most, but not all areas, the sum of all RENs should be five (5. 0) or less. If you have specally wred alarm dalng equpment connected to your telephone lne, ensure the connecton of ths equpment does not dsable your alarm equpment. If you have questons about what wll dsable alarm equpment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. [. . . ]