User manual VTECH CODY CARPENTER LIGHT AND LEARN BENCH

[. . . ] When it comes to providing electronic learning products that enlighten, entertain and develop minds, at VTech® we see the potential in every child. 1 INTRODUCTION Thank you for purchasing the VTECH® Cody Carpenter's Light 'n LearnTM Bench learning toy!We at VTECH® are committed to providing the best possible products to entertain and educate your child. Should you have any questions or concerns, please call our Consumer Services Department at 1-800-521-2010 in the U. S. [. . . ] NOTE: If for some reason the program/activity stops working, please follow these steps: 1. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U. S. or 1-800-267-7377 in Canada, and a service representative will be happy to help you. 4 TO BEGIN PLAY 1. To begin play, slide the ON/OFF/MODE SELECTOR SWITCH to the TALKING MODE ( ) or MUSIC MODE ( ) position. 2. To use the activities on the other side of the bench, turn the workbench 180°. 4. To adjust the volume, slide the VOLUME CONTROL SWITCH to the ( ) position for LOW VOLUME or to the ( ) position for HIGH VOLUME. 5. To turn the unit OFF, slide the ON/OFF/ MODE SELECTOR SWITCH to the OFF ( ) position. © VTECH Printed in China 91-01425-000 5 Note: To preserve battery life, the VTECH® Cody Carpenter's Light 'n LearnTM Bench learning toy will automatically power-down after several seconds without input. The unit can be turned on again by hammering any button. ACTIVITIES A. Slide the ON/OFF/MODE SELECTOR SWITCH to the TALKING MODE ( ) position. You will hear "I'm busy beaver, let's hammer!" followed by a hammering sound effect. Hammer the LETTER OR NUMBER PEGS to hear a random sound effect followed by the identification of the number or letter of the peg that was hammered. Hammer the SHAPE PEGS to hear a random sound effect followed by the identification of the colour and shape of the peg that was hammered. If there is no input to the pegs after 10 seconds, the beaver character will encourage the child to hammer on the pegs. If there is no input to the pegs after another 30 seconds the unit will automatically power down. You will hear "I'm busy beaver, let's hammer!" followed by a melody. Hammer the SHAPE PEGS to hear a random sound effect followed by a preprogrammed melody. [. . . ] or 1-800-267-7377 in Canada, with any problems and/or suggestions that you might have. Note: This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, it may cause interference to radio and television reception. It has been type tested and found to comply within the limits for a Class B computing device in accordance with the specifications in Sub-part J of Part 15 FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. [. . . ]