User manual VTECH A200

[. . . ] Contents Additional network services 23 Setting network services, call waiting, answering a waiting call, brokering calls, rejecting a waiting call, making a call enquiry, making 3 way (conference calls). Important Safety information Setting up your telephone Locating the base station, installing the handset batteries, charging the handset. 2-3 4-5 Additional handsets 24-25 Register an additional handset to your base, base homing, removing a handset registration. Intercom 6-7 26 Making calls Pre dial, post dial, call timer, receiving calls, range, hands-free calls, muting, pause. Working with two or more handsets, making collective calls, receiving external calls when on an intercom call, making an intercom call when on an external call. Caller display To dial a number from the call list, to delete all numbers from the call log, to copy a number from the call list into the phonebook. 8 Additional base units Connecting to a switchboard. 27 28 Troubleshooting 9-11 Answering system Setting up, PIN code, ring delay, emergency number, filtering. Message display, memory full. Other handset features Redial list, switching the handset on & off, paging the handset(s), belt clip, headset socket. Additional network services, menu system. 12-13 Phonebook Storing names/numbers. Viewing names, dialling, editing, deleting, languages. 14-15 Customising your base unit 16-20 Using handset with different bases, key lock, monitor, base select. [. . . ] Messages can only be played back via the handset. 10 Answering system Answering system AS is full: If the Answering System (AS) is switched OFF · Let the phone ring 10 times. · AS will be turned on automatically and you can use the keypad to control the system. Message display The handset display will provide information on the status of the answering system: Memory full If the memory is full the system will switch to answer-only mode automatically and not allow callers to leave a message. If the memory becomes full in the middle of a message, the AS will give 2 beeps before hanging-up. Display prompts for NEW PIN; key in new PIN , AS has one new message: press . Display prompts REPEAT; key in new PIN again. AS has one old message: Please remember to record this new number safely where you can get to it away from home. You will not be able to access your answerphone messages away from home without this code. AS has no message: Answering system 11 Press , handset beeps to confirm. Other handset features Paging the handset(s) Your base station has a page button. This button is used to send a signal to all registered handsets (provided they are switched on) and also to initiate the registration process for additional handsets. It is recommended that you change the ring tone on the handsets to enable users to distinguish internal paging from external calls. Using the clip the handset can be attached to a belt, trouser waist band, etc. When a headset is connected the microphone of the handset is muted automatically. Redial list Your A200/C200 will store the last ten numbers dialled automatically. Press until the required number is visible on the ;the number will be dialled automatically. To delete numbers from the redial memory, ensure the number is on the display and press twice. Switching the handset ON & OFF The handset can be switched off, if it is not required to ring, however the base unit will ring. Other handset features 12 To turn the handset OFF: Press and hold until the handset beeps and the screen goes blank. To turn the handset ON : Press and hold until the handset beeps, the display will show status once the handset has latched on to the base. Note: The handset will not respond to paging when switched off. Other handset features Additional network services The key can be used to access additional network services. Menu system Your telephone features a simple menu system with informative display messages. SCROLL DOWN; used to scroll down within menus and access CID log. The main menu consists of the following sub menus: PHONEBK TAD MENU (only available with C110 models) LANGUAGE REGISTER KEY LOCK MONITOR B SELECT BASE HANDSET Note: When KEYLOCK is active no calls can be made . This includes emergency calls. Other handset features 13 PHONEBK = Phone book PHONEBK = PHONE BOOK Your A200/C200 DECT telephone can store up to 40 of your popular numbers. This will allow you to retrieve the numbers and dial them with minimal key strokes. Continue to enter names and numbers or press to access MELODY, DEL ALL, DELETE, EDIT menus or press to return to standby mode. When the edit mode prompts for a NAME, the alpha characters on the keys become active. If you enter an incorrect letter, use to delete. Example: to enter letter R in edit mode, press the key 7 three times, repeated presses of the key will show succeeding letters and number. If the key is not pressed for a few moments, the cursor moves to the next position to the right, ready for the next letter to be entered. [. . . ] Enter number of handset to be called. Making an intercom call while on an external call 1. Press . To return to the external call, press Making collective calls If you have 3 or more handsets registered to one base, you can call all handsets at once. The first handset to answer will connect, all others will be unable to connect. . 26 Intercom Additional base units Warning: Certain switchboards may not be compatible with your A200/C200 DECT telephone system. The following systems are NOT compatible: Loop-disconnect or pulse dialling. [. . . ]