User manual VOSONIC X-DRIVE PRO VP300

[. . . ] 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of Panels & keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the X's-drive Pro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3-1 Starting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Scroll to " FILE Mode " with UP and down buttons. HD <MODE Select> FILE Mode MP3 Mode COPY Auto COPY · Press the " COPY" button , files transfer function can be performed. HD CF Display The Amount of Transferring Files Copy to HD\CF0001 19 Files Copied 10% Transferring File Elapsed Percentage COPY HD CF · If the arrow has stop flashing , it indicates the file is successfully copied HD CF FILE Copy to HD\CF0001 19 Files Copied ------ COPY OK -----: [ OK ] 2) Single File Copyy · Scroll to "FILE Mode" with UP and down buttons. · Use the UP and down buttons to find the file you want to copy. · Press "COPY" button, Single File Copy function can be performed. · If the arrow has stop flashing, it indicates the file is successfully copied X's-Drive Pro VP300 8 3) All files transferred from each memory card are stored onto the Hard Disk in folders numerically, under the name "CF0001 ", "MS0001", "SM0001", "SD0001". 4) When the same card was inserted and copied twice, two different folders were created, X's-drive Pro won't overwrite the folder. 5) To stop the data transfer, just depress the "stop/esc" button and the arrow icon will cease to flash, ---COPY STOP----- message will pop in the screen, then you can switch off the device or press "stop/esc" button to switch to main menu. HD CF FILE Copy to HD\CF0001 000 Files Copied ------ COPY STOP ------: [ OK ] 6) When X's-drive Pro begins connecting to the computer, the "HD Transfer" icon keeps flashing during connection period. When inserting a memory card into the slot, the corresponding icon will appear. Remove memory card(s) from the card slot Otherwise, there may be a chance of lost or corrupt data. Note: Keep it plugged into the AC adapter/charge while connected to your computer. 9 X's-Drive Pro VP300 3-3. Delete File · · · · Scroll to "FILE Mode" with UP and down buttons. Press " " to select "HD Device" Use the UP and down buttons to find the file you want to delete . Press "COPY" button, the ---- FILE DELETE ----- message will pop on the screen to confirm again. HD CF HD:\010253MB CAR 03/10/29 000073KB :JPG 11:08:40 [JPG] FILE DIR-00 ---- FILE DELETE ---- : [ SURE ] · Press " Enter ", File Delete function can be performed. Note: The File Delete will function only under on the Hard Disk. 3-4. Card Selection · Scroll to "FILE Mode" with UP and down buttons. · Press " " to "Device Select" · Select the socket you want to read with UP and down buttons. 3-5. Play MP3 Music 1) Use the UP and DOWN arrows to locate a folder or a song you want to play 2) Press " " button, the device will start playing the song in the play list. If you hear nothing at first, make sure you have adjusted the volume control. 3) The "VOL -" / " VOL +" buttons control the volume while you listen 4) Use the " " button to pause a song and then again to restart the song. 5) Use the "Copy" button to play all tracks in the current directory then again to play a single track. 6) Hold the power button for 2 seconds to select the EQ mode. X's-Drive Pro VP300 10 7) The Display: Battery level Socket Folder Layer Indication File Name Song length Status: Playing Song time elapsed EQMode: JAZZ, ROCK, CLASS, POP, NORM PlayMode: No icon : Repeat a single track : Repeat all tracks in one directory Volume: 32 levels of volume 3-6. Auto Power off Function 1) There is an auto screen - off function to save battery power. Battery Recharge: 1) To charge the batteries, please connect the plug of the AC adapter to DC 12V jack of the main unit. [. . . ] The memory card will work fine after. In case that the X's-Drive II hangs, you can reset it via this button-note that the data on the Hard disk will not be affected. X's-Drive Pro VP300 18 Question My computer only has USB-1 ports available. Can I format the X's-Drive to the NTFS/HFS/HFS+ /EXT2, etc, file systems?Can I share the X's-Drive among MacOS, Windows and Linux? Answer The X's-Drive is an USB-2 device, but it does not matter. Both USB-1 and USB-2 devices can be connected to USB-1 ports, as they are detected and managed in the corresponding way. [. . . ]