User manual VOLTCRAFT BS-100 X V07-10

[. . . ] For safety reasons, disconnect all system parts from the power supply before every inspection. Carefully plug another compatible gooseneck camera or extension tube into the socket. Be careful not to break the pins inside the plug of the gooseneck camera. After a short time, the image filmed by the camera appears on the screen. [. . . ] This product fulfils European and national requirements related to electromagnetic compatibility (EMC). cE conformity has been verified and the relevant statements and documents have been deposited at the manufacturer. Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly and keep them for further reference. Batteries/ rechargeable batteries containing hazardous substances are marked with the crossed-out wheeled bin. You can return used batteries/ rechargeable batteries free of charge to any collecting point of your local authority, our stores or where batteries/ rechargeable batteries are sold. Consequently you comply with your legal obligations and contribute to environmental protection!Use the included AV cable in order to establish the connection to your replay or recording device. The camera image is displayed if the connection and the choice of video source are correct. Carefully plug a compatible gooseneck camera or extension cable into the socket. Be careful not to break the pins inside the plug of the gooseneck camera. If you are using an extension cable, connect a camera to the end of the extension cable. We do not assume liability for resulting damages to property or personal injury if the product has been abused in any way or damaged by improper use or failure to observe these operating instructions. Carefully read the whole operating instructions before operating the device, otherwise there is risk of danger. the battery should only be removed or replaced by a specialist / specialist workshop. Remove the battery when the endoscope is not going to be used for a long period of time. The battery status icon shows the remaining battery power in five levels. [. . . ] It can be assumed that safe operation is no longer possible if: - the device is visibly damaged, - the device no longer works and - the unit was stored under unfavourable conditions for a long period of time or - it has been subjected to considerable stress in transit. â· You should also heed the additional safety instructions in each chapter of the operating instructions for the connected devices. â· Never switch the device on immediately after it has been taken from a cold into a warm environment. With the "+" / "-" button, adjust your desired value. [. . . ]