User manual VOLKTEK INS-8008 QUICK INSTALLATION GUIDE

[. . . ] Hardware Installation Procedure STEP 1: INS-8005 Quick Installation Guide INS-8005/INS-8008 1. [. . . ] On the INS-8008, connect the grounding screw to the ground wire. Grounding Screw -1- -2- -3- STEP 4: Connect the Ethernet (RJ-45) port to the networking device. See the LNK/ACT LED to confirm that the connection is established. 5. Wall-Mounted Mask of INS-8005 & INS-8008 STEP 1: The wall-mounted direction can be straight or horizontal. Cabling­ RJ-45 The RJ-45 ports on the INS-8005/INS-8008 support auto negotiation and auto MDI/MDI-X. Location The INS-8005/INS-8008 can be placed on a desktop or horizontal surface, wall-mounted and Din-Railmounted. DIN-Rail-mounted with INS-8005 STEP 3: Mark the Xs on the wall at the appropriate place. [. . . ] VOLKTEK Corporation www. volktek. com support@volktek. com Ph: +886-2-8242-1000 Fax: +886-2-8242-3333 Distributor for France PREDATA © www. trade@predata. fr trade@predata. fr Ph: +33 (0) 326221414 Click Mounting holes for INS-8005 and INS-8008 Mounting the Switch Removing the Switch DIN-Rail-mounted with INS-8008 1 Push 1 Push Mounting bracket for INS-8008 2 Click 2 Click 1:1 drawing of INS-8005 and INS-8008 For INS-8008 please remove DIN-rail kit before mounting. Mounting the Switch Removing the Switch -4- -5- -6- 6400-000007 [. . . ]