User manual VIVANCO WLAN ROUT 54-N QUICK GUIDE

[. . . ] The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. Always read the safety instructions carefully - Keep this User Manual for future reference - Keep this equipment away from humidity - Lay this equipment out on a reliable flat surface before setting it up - If any of the following situations arise, have the equipment checked by a service technician: - The equipment has been exposed to moisture. [. . . ] - The equipment has not been working well or you cannot get it work according to User Manual. 0 Docking Station is a unique expansion unit specifically designed to accompany notebooks or desktop PCs with additional connectivity requirements. 0 port required from a notebook/desktop PC, not only USB but also conventional PIO, SIO, LAN, and PS/2 peripheral devices can be accessed freely. Moreover, this product is fully backwards compatible with the USB Revision 1. No longer will you have to turn PC or notebook inside out for hardware setup or go through complex software installations in order to utilize peripherals. With the docking station, simply plug and play all types of USB/conventional peripherals simultaneously without having to worry about the availability of ports or the need to re-boot your notebook/PC. Great expansion unit for notebook to other devices Compliant with USB 1. USB scanner or multi-function peripheral, MFP) with power requirements higher than this value will not work. In this situation, it is recommended to operate the docking station in the self-power mode whenever possible. When connecting peripheral devices to the docking station, pay attention to the following notes: USB Hub Ports: When connecting a USB device to one of the downstream USB ports of the docking station, make sure to follow the software installation manual accompanied (if any) with this USB device. PS/2 Ports (Keyboard and mouse port): Some compatibility issue may occur due to the loosely specified PS/2 protocols and the sheer number of existing brands/models. However, if the PS/2 keyboard or mouse is IBM PC compatible, then it should be able to work with the docking station properly. A modem) to the docking station and the docking station is already connected to a PC, you need to perform the Add New Hardware function from the Control Panel or remove and re-plug the docking station to the PC to find the device and perform the function. USB-to-serial interface: The interface was designed to work with modems or any serial device that has drivers capable of handling "VIRTUAL PORT". [. . . ] USB-to-serial interface: The interface was designed to work with modems or any serial device that has drivers capable of handling "VIRTUAL PORT". Serial mice are old devices, and most of their drivers recognize physical serial ports only. [. . . ]