User manual VIVANCO UR 03 UF UNIVERSAL CONTROLLER

[. . . ] (GB) Instructions VIVANCO UR 03 UF remote control for almost all TV, audio, video and other infrared-controllable appliances Inserting the batteries Open the battery compartment on the underside of the UR, see Fig. Make sure that the polarity is correct: the "+" and "-" markings on the batteries and in the compartment must match. [. . . ] ­ Except when searching for a TV code you can also briefly press the (Play) button and use the Play function to help search and press ON/OFF for testing the next code. Make sure that a tape, a DVD or a CD is inserted in the tape deck, player or recorder. Your TV reacts by power off or your DVD player, reacts by Play > button. - If your appliance has switched itself off you must switch it back on again, e. - When your appliance reacts you can also try out other buttons without interrupting the search. If some buttons do not work properly, simply continue searching with ON/OFF or Play. - The UR 03 UF continues with the search at the point where you interrupted it. Automatic code search Your remote control finds the correct settings almost automatically in seconds: 1. A channel number, for example, appears in the display of your satellite receiver. Then press SET for about 5 seconds until the lamp (LED) starts to blink. Then point the remote control at the appliance to be controlled while the remote control emits a different ON/OFF signal every second. When your appliance reacts, press SET within 1-2 seconds, to end the search. [. . . ] Exceptions: missing codes, deliberate destruction and normal wear and tear of the housing and buttons. Anpassning till en apparat För att du ska kunna styra dina apparater måste du ställa in fjärrkontrollen till dina apparater, så att den passar till resp. [. . . ]