User manual VIVANCO UNIVERSAL LCD 8 IN 1 REMOTE CONTROL

[. . . ] (GB) Operating Instructions Vivanco UR 850 LCD remote control for practically all TV, audio, video and other infrared-controllable devices Inserting the batteries Open the battery compartment on the back of the device, push the flap down lightly and insert 2 AA alkaline batteries. Make sure that the polarity on the batteries and in the battery compartment correspond (thick spring = cell at bottom = -) and then close the lid carefully. Adapting to devices In order to control your devices you must adapt or set the remote control to them. [. . . ] When the code corresponds to your device, press OK and the setting for this device is completed. If the code you have found does work at all or not properly, try another code by selecting the next code for the brand using the or button, then test the code as described above under 4. 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. 3 Enter the time using the number buttons and confirm with the OK button. Set priority volume control With this function you can determine a device exclusively for volume control, e. Then the buttons VOL +, VOL ­ and always control the amplifier, regardless of which device you are controlling. Code search If the brand of your appliance is not in the list or none of the codes given fits, we recommend the automatic code search. Your remote control finds the correct control settings almost automatically in a few seconds: 1. For example, a program number appears in the display of your satellite receiver. 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. Locking or releasing device codes To prevent settings from being changed accidentally, proceed as follows: 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. 7 m Not suitable for 400 kHz devices 2-year works guarantee Should your UR 850 LCD cease to work within 2 years of purchasing you will receive a free replacement from Vivanco. Exceptions: missing codes, deliberate destruction and normal wear and tear of the housing and buttons. Backlight To save battery capacity you can switch off the LCD illumination. [. . . ] Operation You operate your appliances basically in exactly the same way as if you were using the original remote controls, except that you must first press a device button (TV, DVD, etc. As the symbols on the UR 850 LCD could differ from those on the original remote controls you may have to try out all the buttons in order to find the functions. Hotline If you have any questions regarding the UR 850 LCD, please call the Vivanco Hotline: Tel: 01442 246088 Alternatively, send an e-mail to: consumer@vivanco. [. . . ]