User manual VIVANCO UNIVERSAL CONTROLLER UR 100 LCD

[. . . ] (GB) Instructions for Universal remote control to control almost all TV sets, satellite receivers, DVB-Set Top Boxes (STB), DVD players and recorders, CD players and other infrared-controllable devices. [. . . ] It is possible that there are several suitable codes and you should find out the most suitable. When the first and second number buttons are pressed the blinking goes on; when the third is pressed, the selected code is indicated without blinking. If everything is okay, you can set the remote control as described in steps 1 to 5 for other devices. The letters on the device buttons TV1/TV2*), DVD/VCR, DVB1/DVB2*) SAT1/SAT2*), AUX1/AUX2*) are for your orientation only. If you do not find a suitable code for a device, look for it using the code search. *): All device keys can be assigned twice so that 10 different devices can be 4 Code entry The correct control codes can be set via direct code entry or automatic code search. If you press a key once according to these instructions you can enter a device code for the first assignment or control the first device. If you press a device key twice within 2 seconds you can set the key for a second device, or control a second device via the key. [. . . ] 5 Commande des appareils Pour commander un appareil déterminé, appuyez d'abord sur une touche appareil, par exemple TV si vous désirez commander un téléviseur, puis sur les touches de fonction désirées. [. . . ]