User manual VIVANCO PCI GIGABIT ETHERNET CARD PROGRAMMING

[. . . ] - When your appliance reacts you can also try out other buttons without interrupting the search. If some buttons do not work properly, simply continue searching with ON/OFF. [. . . ] Automatic code search Your remote control finds the correct settings almost automatically in seconds: 1. Switch on the appliance to be controlled so that you can watch a TV program. To start the code search, press the SET button, and then additionally the appliance button e. TV or DVB, for more than 3 seconds until the Power-key lamp (LED) starts to blink. Then point the remote control at the appliance to be controlled while the remote control emits a different ON/OFF signal every 2 seconds. When your appliance reacts, press any button, except SET, to end the search. ­ If you ended the search too late, continue to search using the Manual Code Search (see above). Once the numbers have been entered the button lamp goes out and the remote control is ready to control your appliance. Finally, test the control code setting by trying to control your television set. If it does not work at all or not correctly try a different code from the list or the code search (see below). Code search If the brand of your appliance is not in the list or none of the codes given fits, we recommend a code search. To prepare the code search, briefly press the SET button and then additionally a Assigning volume and mute exclusively to one appliance Press the appliance button of the appliance that you always want to use for volume control, e. Operation You operate your PCI GIGABIT ETHERNET CARD basically in exactly the same way as if you were using the original remote control. As the symbols on the PCI GIGABIT ETHERNET CARD could differ from those on the original remote control you may have to try out all the buttons in order to find the functions. [. . . ] As the symbols on the PCI GIGABIT ETHERNET CARD could differ from those on the original remote control you may have to try out all the buttons in order to find the functions. 7 m Not for 400 kHz equipment 2-year works guarantee Should your PCI GIGABIT ETHERNET CARD cease to work within 2 years of purchasing you will receive a free replacement from Vivanco. [. . . ]