User manual VIVANCO CAR 3IN 1 LCD RAPID CHARGER, USB POWER ADAPTER & EMERGENCY BATTERY

[. . . ] With the CAR 3IN1´s rapid charger function you can charge 1-4 nickel-cadmium (NiCd) or nickel-metal hydride (NIMH) batteries of the type With the CAR 3in1´s USB power adapter function you can power, e. [. . . ] When 50% of the battery capacity is charged the first segment stays on. - If a defective or wrong type of battery is connected, the corresponding Battery icon twinkles and the charging of that cell is stopped. When all segments stay on a cell is charged completely and the device automatically switches over to trickle charge. This provides optimal protection against overcharging and the batteries can remain in the charger until required for use. If the battery temperature is too high , the charger will stop charging. Please note that charging times vary according to the capacity (see battery pack imprint) and condition of the battery pack. Make sure that the connected device does not consume more current than 300 mA. Switch on back-up power by pressing button Back up Power on/off for more then 3 seconds until REFRESH, see Fig 3, is shown on the LCD. [. . . ] Använd Input 5V= - 12 V= bak till vänster på apparaten för att ansluta den till fordonsuttag eller en dator USB-port. [. . . ]