User manual VIVANCO CAR 2XAA

[. . . ] safety precautions: · This device is suitable only for charging nickelcadmium (NiCd) or nickel-metal hydride (NiMH) battery packs. Any attempt to charge other (nonrechargeable) batteries or battery packs can cause serious damage and is therefore not permitted. [. . . ] Make sure that the batteries are connected with the correct polarity and that perfect contact is guaranteed. Connect the mains plug of the AC lead to a mains power outlet (100-240 VAC, 50/60 Hz) and the other end of the cable to the charger's AC connector. or connect the charger to the car's cigarette lighter socket using the car adapter. Or connect the charger to a computer USB port or USB charging adapter using the USB power cable. For vehicle or computer connection use Input 5V= - 12 V= on rear left hand side. The LED control lamp and on the LCD CHARGE and the battery icon of an individual battery turns on to indicate that the battery is being rapidcharged correctly. -You can interrupt power output by pressing Back up Power on/off again. Power output will be stopped, when used batteries inside CAR 3in1 are empty. To enable charging start of some MP3 players, the player must be switched off, in some it must be switched on. Make sure that the connected device does not consume more current than 300 mA. To enable charging start of some MP3 players the player must be switched off on some it must be switched on. The battery placed into utmost right slot must provide a minimum voltage of 1, 2 V. [. . . ] The battery placed into utmost right slot must provide a minimum voltage of 1, 2 V. Koppla sladdens stickkontakt till ett nätuttag (100240V AC 50/60 Hz) och andra ändan av kabeln till laddarens DC ­ anslutning eller koppla laddaren till ett cigarrettändaruttag i ditt fordon med hjälp av fordonsadaptern. [. . . ]