User manual VIVANCO AV TRANSMITTERRECEIVER SET WITH IR FEEDBACK CHANNEL

[. . . ] Do not operate the devices at temperatures above 40°C Protect the devices from moisture and do not use them outdoors. The devices should only be supplied with electricity using the power adapter supplied. [. . . ] ­ If your video source no longer has a Free scart output, you can purchase the appropriate Vivanco accessory (e. If your video source has free phono outputs, make the connection using a Vivanco phono cable, e. Connect the power adapter to the DC IN 9 VDC power socket (3) on the transmitter, then plug the power adapter into a mains socket. Transmission of remote control signals from receiver to transmitter This audio/video transmitter/receiver set not only allows the wireless transmission of picture and sound signals, but also lets you control audio/video sources using the existing remote controls from another room. The infrared signal for remote control is captured by the infrared window IR (2) of the receiver, converted into radio signals and then emitted to the audio/video source as an infrared signal by an infrared sensor on the transmitter. Position the infrared sensor in front of the infrared window of your audio/video source(s). To control the device, point the remote control of your AV source at the IR window (2) of your FM receiver. Connect the power adapter to the DC IN 9 VDC power socket (3) on the transmitter, then plug the power adapter into a mains socket. The connection between video recorder and TV can be made via a scart connection between the two devices or using an antenna cable. Selecting a transmission channel To ensure optimal signal transmission, 3 different transmission channels are available. Optimal positioning of transmitter and receiver If required, the transmission quality can be optimised by moving and/or revolving the transmitter and/or receiver and/or their aerials . From microwave ovens, therefore optimisation as described above may not help. [. . . ] Använd bifogad 3, 5 mm/scart-mottagarkabel och anslut den enligt följande: Koppla 3, 5 mm jackkontakten till mottagarens AV-anslutning (5), och koppla scartkontakten till motsvarande scartingång på din videobandspelare eller DVD-inspelare. Mottagarens IR-detektor infångar fjärrkontrollens infrarödssignal, som omvandlas till en radiosigna l(FM), som sedan överförs till sändaren och via sändarens IR-detektor ytterligare till audio/videoprogramkällan som ett IR-kommando. [. . . ]