User manual VITEK VT-H41

[. . . ] 4 Channel Digital Video Recorder with H. 264 Compression VT-H41 VITEK · 4 Video Inputs with 1 BNC & 1 VGA Outputs · H. 264 Compression · Supports both Dynamic and Static IP Addresses · Up to 120 IPS Recording / Live Display · Remote Viewing over the Internet or LAN · Supports one internal SATA Hard Drive · 250GB to 1TB Internal Storage Options · Quadplex operation enabling simultaneous recording, playback, networking, and backup · 4 Alarm Inputs / 1 Relay Out · 4 Audio Inputs & 1 Output · PTZ Control over RS-485 · Control locally via Included IR Remote control, or Front Panel Controls · Backup via Ethernet or USB VT-H41 SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected "dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. WARNING Do not use if the unit emits smoke, strange sounds are heard, or odor is emitted. Make sure there is no dust accumulation on the power plug or the outlet. Disassembly prohibited Do not place any foreign objects inside the unit. 1 VT-H41 Do not place a container holding water or other liquids above the unit when it is connected to power. [. . . ] Then ARCHIVE calendar screen is displayed. 33 VT-H41 Select the date using displayed. buttons and press SEL button. Then ARCHIVE LIST screen is Select one of the archived data listed using pages of the archived data list, use frame of video data is displayed. buttons and press SEL button. OPERATION - BACKUP TO USB FLASH DRIVE JPEG and video can be backed up to USB flash drive. When USB flash drive cannot be recognized, format USB flash drive as FAT format 34 VT-H41 Archiving and backup JPEG in Live mode ­ JPEG image can be archived on HDD and be backed up to USB flash drive in live mode. (Refer to page 39) Archiving and backup VIDEO in Playback mode ­ JPEG, AVI, or EXCLUSIVE VIDEO can be archived on HDD and be backed up to USB flash drive in playback mode. (Refer to page 40) Backup JPEG, AVI, or EXCLUSIVE VIDEO from ARCHIVE search ­ JPEG, AVI, or EXCLUSIVE VIDEO can be backed up from ARCHIVE search menu. (Refer to page 41) Playback of AVI or EXCLUSIVE VIDEO ­ AVI can be played back using Media Player software. (Refer to page 43) When the selected list is video, VIDEO TYPE screen is displayed. EXCLUSIVE VIDEO: When this is selected, the video is backed up as an exclusive video format that can be played back using the exclusive viewer. 5-1. Archiving and backup JPEG in Live mode Connect a USB flash drive to the USB terminal. "JPEG IMAGE IS ARCHIVED ON HDD" is displayed. 35 VT-H41 Then SAVING screen with backup status bar is displayed after "CHECKING USB" message. After the backup is done, "BACKUP IS COMPLETED" message is displayed. When the DVR can not recognize USB thumb drive or no USB thumb drive is connected to the USB terminal, "PLEASE CHECK BACKUP DEVICE" message is displayed. 5-2. Archiving and backup VIDEO in Playback mode Connect a USB flash drive to the USB terminal. Press SEARCH button and go to the video to be backed up. 36 VT-H41 Press CAPTURE button at the scene of video to be backed up. Select a file type from JPEG, AVI, or EXCLUSIVE VIDEO using buttons and press SEL button. Then DURATION screen is displayed. When JPEG IMAGE is selected, please use the same backup procedure as Set the duration to be archived and backed up from the scene of video using and press SEL button. buttons Then SAVING screen with backup status bar is displayed 37 VT-H41 After the backup is done, "BACKUP IS COMPLETED" message is displayed. 5-3. Backup JPEG, AVI, or EXCLUSIVE VIDEO from ARCHIVE search Press SEARCH button. Then SEARCH screen is displayed. Go to ARCHIVE field using buttons and press SEL button. ARCHIVE search calendar is LIST screen is displayed. Select the date in Red using displayed. buttons and SEL button. 38 VT-H41 Select VIDEO clip from the list using or the first scene of the video is displayed. buttons and SEL button. Then a paused image Press CAPTURE button. Select AVI or EXCLUSIVE VIDEO using buttons and press SEL button. Select USB FLASH DRIVE using backup status bar is displayed. buttons and press SEL button. SAVING screen with 39 VT-H41 After the backup is done, "BACKUP IS COMPLETED" message is displayed. 5-4. Playback of AVI or EXCLUSIVE VIDEO Playback of AVI format: AVI format video can be played back by Windows Media PlayerTM or other media player that is compatible with AVI format video. When PC doesn't have proper H. 264 CODEC, the media players can not playback the AVI format video. In this case, you may install CODEC that is provided on the DVR (Exclusive video format): DVR format video can be played back by the player (the exclusive viewer) that the DVR copies on USB thumb drive with video. [. . . ] Enter IP address (or Domain name address that you pre-registered on 66 VT-H41 www. vitekddns1. com), Port number and Password and click "Connect" Server address: Input IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS or Domain name address that you pre-registered on www. vitekddns1. com Port: Input Port number (The number sets on SETUP>NETWORK>PORT) Password: PASSWORD 7. Input Password (The number sets on SETUP>SYSTEM>NETWORK 67 VT-H41 APPENDIX: How to connect to a network A. How to set the IP address of the DVR and open the TCP port of the router? The port forwarding is dependant on the brand and model of the router. The port forwarding is required to allow access to the DVR beyond a router. 1. [. . . ]