User manual VISIO L32

[. . . ] LIQUID CRYSTAL HDTV L32 HDTV www. vizioce. com VIZIO L2 HDTV User Manual Dear VIZIO Customer, Congratulations on your new VIZIO L2 High Definition LCD Television purchase. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience years of enjoyment from your new VIZIO L2 High Definition Television. For assistance, please call 714-668-0588 or email us at techsupport@vinc. com. [. . . ] If you do not, make sure that all connections are secure and you have selected the correct video input source. Press the Channel buttons on the remote or the + /- buttons on the front of your LCD TV to change the channel. Note: The Channel buttons will not work if you are watching a program using Digital HD, Analog HD1, Analog HD2, AVI, AV2 or AV inputs. 3. 3 - Adjusting Basic LCD TV Settings Volume To increase the volume, press and hold the VOL + button on the front panel or remote control until the desired level is reached. To decrease the volume, press and hold the VOL - button on the front panel or remote control until the desired level is reached. TV Channels To step up through the available TV channels, press the CH + button on the front panel or remote control once for the next channel or hold it depressed until the desired channel is reached. To step down through the available TV channels, press the CH - button on the front panel or remote control once for the previous channel or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate on TV and DTV modes. Wide Using this feature, you can watch video content in different size modes on the TV. Press the WIDe button on the remote control to switch among the modes. For more information see section . 5. 10. 2 Version- 11/29/05 www. VIZIOCE. com VIZIO L2 HDTV User Manual 3. 4 DTV Tuner Setup Press the DIgITAL HD button on the remote until "DTV" appears on the top right of the screen. When the MeNU button is pressed, the On-Screen Display (OSD) appears on the PICTURe ADJUST page. Press the RIgHT arrow button to highlight the TV selection. This will display the DTV TUNeR SeTUP OSD. Version- 11/29/05 www. VIZIOCE. com VIZIO L2 HDTV User Manual Time Zone ­ Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the guide button on the remote control. Press the DOWN arrow button and the TIMe ZONe category is highlighted. Select "AUTO" if you are not sure what type of source you are using. Scan ­ Automatically scans for all of the digital TV channels available and stores the information in memory. NOTE: This will take several minutes to complete. Once Auto Scan has finished, press the exit button to return to the previous menu. NOTE: If you press OK, the Auto Scan process will start again. Note: you will not get as many Digital cable channels as your Setup box will have. The channels you will receive are clear QAM through your local cable provider. 4 Version- 11/29/05 www. VIZIOCE. com VIZIO L2 HDTV User Manual Manual Scan ­ If you feel that not all of the available digital TV channels were found with Auto Scan, then selecting this option makes the TV try again to find any missing channels. Press the DOWN arrow to highlight MANUAL SCAN and then press the OK button. NOTE: A channel will be missed if it is not transmitting at the time of the scan and so you should try again at a time when you know the station is transmitting programs. Re-orientation of the antenna or changing to a higher gain antenna may help, but note that any changes to the antenna may affect the other channels. The MANUAL SCAN screen now appears and this can be used in two ways. The screen defaults to ADD-ON MODe and pressing the OK button at this stage makes the TV scan the whole channel range again. NOTE: If the OK button is pressed, then the automatic scanning will start again. If the or button is pressed first, then RANge MODe is activated so that the user can specify a smaller range of channels they want scanned again. NOTE: If the OK button is pressed, then the automatic scanning will start again. 5 Version- 11/29/05 www. VIZIOCE. com VIZIO L2 HDTV User Manual Channel Skip ­ gives you the option to skip channels when using the Channel + or Channel - keys. [. . . ] To obtain warranty service in the Untied States, you must first call our Customer Support at (714) 668-0588, 7:0 am ­ 5:0 pm PST. Parts New or remanufactured replacements for defective parts will be used for repairs by VIZIO at its designated Service Center for one (1) year from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period. Service During the one (1) year warranty period, VIZIO will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. [. . . ]