User manual VICTORINOX SWISS ARMY HUNTER MACH 3

[. . . ] These arrows indicate which button should be pressed, if the crown should be turned, or even if a setting error causes a "No Operation" message to appear. Press button A briefly Press and hold button A Turn the crown up or down NO OPERATION 4. DIAL LIGHTING Pressing the crown (0) briefly will light up the dial for approx. ENERGY-SAVING MODE It is possible to set the watch to "energy-saving" mode if you do not intend to use it for several days. [. . . ] 6. 4. 2 Setting the date, month and year The date (D), month (M) and year are changed by rotating the crown. Press button B briefly to confirm date setting (D), then confirm the month (M) and year. Date Month 16 Year 17 6. 4. 3 Choosing and setting one of the four languages for day name display Select one of four languages available for the day display by pressing and holding button A. Turn the crown (in position 2) to display the name of the day in either (F) French, (E) English, (D) German, (S) Spanish. All date settings as described in 6. 4. 1 to 6. 4. 3 are confirmed by pushing the crown back to position 1. 6. 4. 4 Deactivating the week number display The week number display is deactivated by pressing button A briefly (crown in position 1). It will reappear after another function is selected by turning the crown. Repeat if necessary. 6. 5 Setting a second time zone (or home time or summer/winter time) In "local time" (T1) display, select the second time zone (T2) function by briefly pressing button B then pulling the crown to position 2. The time of the second time zone (T2) may be changed to display in the 24 hour or AM/PM system by briefly pressing button A. Briefly press button B to confirm setting of the T2 hour, then adjust the T2 minutes and confirm again. Briefly press button B again to set the date for the second time zone chosen. 19 18 6. 5. 1 Date of the second time zone option If you wish, you may set the date of the second time zone with a variation of plus or minus 1 day to local time (T1). E. g. , If the date in the local time is the 25th, the date of the second time zone is either the 24th or 26th (maximum difference between two time zones is one day). 6. 5. 2 Setting the date of the second time zone After you have pressed button B a third time as described in 6. 5, you may set the date of the second time zone by turning the crown. The message "NO OPERATION" shows that it is not possible to adjust the date by more than plus or minus 1 day. 6. 6 Setting the alarm (daily alarm) 6. 6. 1 Starting the alarm Select the alarm function (AL) by turning the crown and pressing 20 and holding button A. The letters "ON" will appear on the dial and a "beep" will be heard. Alarm ON/OFF Striking mechanism test: Press and hold button B 6. 6. 3 Stopping the alarm The alarm may be stopped at any moment by pressing either of the buttons or the crown. 6. 6. 4 Testing the alarm sound (applicable to all alarms) When the alarm (AL) function is selected, the alarm sound may be tested by pressing and holding button B. The same test may be used for "Timer" and "Diary" alarms. 21 6. 6. 2 Alarm sound At the chosen alarm time, a first alarm will sound. After 10 seconds, the alarm will sound intermittently for 50 seconds and then stop automatically. 6. 6. 5 Setting the alarm time The hours and minutes of the alarm can be set. First select the alarm function (AL) by turning the crown and then pulling it to position 2. Briefly press button B, thus selecting the figures for the hours and minutes successively. Push the crown back to position 1 after carrying out all the adjustments. [. . . ] ­ RESET the chronograph by pressing button B briefly. 25 6. 8. 1 (cont. ) ­ Add mode allows several timings to be added while automatically subtracting the duration of intermediate events by pressing Start-Stop-Start-Stop ­ etc. For example, total duration of journey from town A to town D with subtraction of stops in towns B and C. 6. 8. 2 Measuring the total time with intermediate time reading (SPLIT or fly-back hand) This function allows, for example, the total duration of a race and the individual time taken by each individual runner to be measured. ­ SPLIT X of timing by briefly pressing button B when runner X finishes. [. . . ]