User manual VESTAX VMC-004FX

[. . . ] Read Instructions-All the safety and operating instructions should be read before the appliance is operated. Retain Instructions-The safety and operating instructions should be retained for future reference. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions-All operating and use instructions should be followed. [. . . ] Follow Instructions-All operating and use instructions should be followed. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture-Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in wet basement, or near a swimming pool, and the like. The product may fall, causing serious injury to child or adult, and serious damage to the appliance. Use only with a surface, or table recommended by the manufacturer, or sold with product. Any mounting of the appliance should follow the manufacturer's instructions, and should use a mounting accessory recommended by manufacturer. Ventilation-Slots and openings in the cabinet are provided for ventilation , to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power sources-This product should be operated only from the type of power source indicated on the marking label. 20. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Carts and Stands-The appliance should be used only with a cart stand that is recommended by the manufacturer. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES 12-step phase shifting circuit allowing DJs to create an extremely wide range effect. Bypass / Effect Crossfader allows the user to instantly switch or move between dry sound or effect sound in one smooth crossfade action. Input select switch ( PHONO/LINE/CD ) offers direct connection possibilities with almost any audio equipment. The VMC-004FX can also be connected between the turntable or the CD player and the mixer if the mixer has an effect loop facility ; or between the mixer and the power amplifier if no effects loop facility is available. The depth of the VMC-004FX is of similar height to a turntable, so it can easily be utilized vertically in a quick set up. Vestax offer a 19" rack frame with two spaces to rack the VMC-004FX alone, or together with other Vestax half rack series effects. FUNCTIONS FRONT PANEL 3 POWER INDICATOR LED will light when the power is on. BIAS CONTROL (AUTO MODE ONLY The center of the frequency band in a shifted signal can be moved from 10kHz to 100Hz and the LFO effect will be active according to the setting. MIX CONTROL Slide to the left, EFFECT is active. In the center position, mix of both. DEPTH CONTROL AUTO MODE ONLY This is to control the width of phasing from wide to narrow. It adjusts the depth of modulation of the phase sound. PHASE MODE SELECT SWITCH This switch is to select 3 types of phase mode. (a) MONO PEAK -Single Peak type shifter to create dynamic phasing sound. [. . . ] In the center position, mix of both. DEPTH CONTROL AUTO MODE ONLY This is to control the width of phasing from wide to narrow. It adjusts the depth of modulation of the phase sound. PHASE MODE SELECT SWITCH This switch is to select 3 types of phase mode. (a) MONO PEAK -Single Peak type shifter to create dynamic phasing sound. (b) MONO DIP -Single Dip type shifter to create natural phasing sound. [. . . ]