User manual VESTAX SL-201MKII

[. . . ] Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions-All operating and use instructions should be followed. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards. [. . . ] Accessories-Do not place this product on an unstable cart, stand, tripod, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. stand, tripod, bracket, or table recommended by the manufacturer, or sold with product. Any mounting of the appliance should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. Lightning-For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. EQ ( HI, LOW ) Adjusts the HI and LOW frequencies for each PGM channel. INPUT LEVEL METER The LED level meters indicate the input signal level of each PGM channel. CROSS FADER When the input level of PGM1 and PGM2 are Properly set, PGM1 will be heard with the cross fader set to the left side. When the cross fader is set in the center, both grograms will be heard. This is a detachable fader for the ease of replacement with "CF-PCV" when it is worn out. Use this jack to connect the head phones. 150 ohm is recommended 9 MONITOR SELECT FADER When the monitor levels of PGM1 and PGM2 are properly set, PGM1 will be monitored in the headphone with the fader set to the left side and PGM2 will be monitored in the head phone with the fader set to the rigth side. When the fader is set in the center, both programs will be monitored in the head phone. 11 MASTER LEVEL VOLUME Adjusts the signal level output from the LINE OUT jack on the rear panel. 12 MASTER BALANCE VOLUME Adjusts the signal balance of the left and right side of the outputs from the LINE OUT jack on the rear panel. [. . . ] 13 MIC LEVEL Adjusts the input level from all microphone inputs. 4 How to change the fader unit. HOW TO REMOVE THE TOP PANEL 1 Remove each fader knobs and 4screws which Driver fix the top panel. 2 Remove the top panel. Top panel Main panel Driver HOW TO CHANGE THE FADER UNIT 1 Remove the screws on the fader panel. 3 Carefully remove the multi-cable connector from fader unit. 4 Attach multi-cable connector to new fader unit. [. . . ]