User manual VESTAX PMC-05PROIII-

[. . . ] Water and Moisture-Do not use this product near water-for example, near a dath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Accessories-Do not place this product on an unstable cart, stand, tripod, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. stand, tripod, bracket, or table recommended by the manufacturer, or sold with product. [. . . ] stand, tripod, bracket, or table recommended by the manufacturer, or sold with product. Any mounting of the appliance should follow the manufacturer's instructions, and sholud use a mounting accessory recommended by the manufacturer. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placting the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack 2 unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. Grounding or Polarization-This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). If you are unable to insert the plug fully into the outlet, try reversing the plug. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES 3 NOTES Before detaching or attaching the headshell, be sure to turn the power of the amplifier or mixer to the OFF position. Detaching or attaching of the headshell with the volume control up may cause damage to the speakers. When playback is finished, use the tonearm clamp to secure the tonearm in rest position. If the unit is not to be used for some time, the stylus protector should be used as well. The headshell terminals must remain clean to avoid "hum" noise or intermittent sound. Failure to do so may cause undue wear of the record or stylus, and deterioration of tone quality. When transporting the unit it is suggested that the original packing materials are used and handled with care. If packing materials are not available, first remove the platter and wrap it separately. Make sure tonearm is seated in rest with clamp fastened and a twist tie is recommended for further security. The balanceweight and headshell should be removed and wrapped separately. [. . . ] If packing materials are not available, first remove the platter and wrap it separately. Make sure tonearm is seated in rest with clamp fastened and a twist tie is recommended for further security. The balanceweight and headshell should be removed and wrapped separately. The turntable should then be wrapped in bubble wrap, blanket, soft paper or other packing material. [. . . ]