User manual VESTAX CDX-05

[. . . ] Top Panel / ENTER 8 7 9 10 TAP LED 11 (TRK MEMO) TIME 1 / ENTER PROFESSIONAL CD PLAYER EJECT (SHIFT) 13 16 17 18 19 20 21 22 TIME PLAY MODE LOOP RELOOP /EXIT EFFECT PLAY MODE SAMPLER DELAY EFFECT SYNC (PGM EDIT) FLANGE FILTER REC COUNT RESET (DISPLAY) SKIP (SHIFT) (PGM EDIT) 2 3 4 LOOP START TAP LOOP ON / OFF LOOP END CUE- PLAY / DEL CUE-SET / INS PLAY (TRK RECALL) CUE 2 CUE 1 CUE 3 (TRK MEMO) SKIP MASTER TEMPO PITCH RANGE Delete program 1. Enter the program edit mode by pressing and holding the SHIFT key and then pressing the PLAY MODE/ PGM EDIT key. TIME / ENTER SEARCH BEND PITCH PLAY MODE CUE-SET / INS (SHIFT) (PGM EDIT) (TRK MEMO) 12 2. Select desired program number that you wan to delete the program with the Jog wheel. 5 / ENTER TIME PLAY MODE SCR ATC H BRAKE BREAK E ERS REV (SHIFT) (PGM EDIT) 6 15 14 23 25 24 5. [. . . ] Use the Jog wheel to change the memory number if necessary. Å@ l DISC ID ÅE Å@ Å@ ÅE Å@ Å@ CUE point Å@ CUE 1-3 points ÅE Å@ Å@E Å@ Å LOOP A/B points Å@ LOOP mode ÅE Å@ Å@ Play mode Å@ ÅE Å@ MASTER TEMPO On/OffÅE ÅE TAP value Å@ Brake On/Off ÅE Å@ Å@ Brake Time Å@ ÅE Å@ Time mode ÅE S a mpling points for the MP 3 file cannot be memoriz ed NOTE 50 51 46 47 48 49 Recal 1. Enter the recall mode by pressing and holding the SHIFT key and pressing the TRK RECALL key. If there is a track memory data for the current selected track, its memory number is shown in the LCD. Å@ / ENTER / ENTER TIME (SHIFT) TIME CUE-PLAY / DEL The CDX-05 can recall the track (song) from the track memory data. Enter the recall mode by pressing and holding the SHIFT key then pressing the TRK RECALL key. Using the Jog wheel to select the desired track memory number. / ENTER (SHIFT) (TRK RECALL) 2. When track memory number is shown in the LCD, pressing the ENTER key recalls the track memory data. TIME CUE-PLAY / DEL (SHIFT) (TRK RECALL) 19 3-6. Sampler Sampling NOTE Å@ CDX-05 includes eight seconds sampler on each player. If the cue point is memorized, pressing the CUE key The locates the unit to the cue point. Åú When you sample, please check that the sampler has stopped. The REC key blinks at this time and it will be in a REC standby state. SAMPLER REC Å@ After pushing the REC key, if 8 seconds of the maximum recording time passes, sampling will be stopped automatically. Å@ Pressing and holding the SHIFT key then pressing CUE selects the method for the CUE key's operation. / ENTER TIME Å@ Pressing the CUE key when unit is paused stores the current point as the Å@ cue point. Å@ Å@ play start point is stored as the Last CUE point. LOOP ON / OFF LOOP ON / OFF (SHIFT) PLAY PLAY Stutter play with the CUE key 2. Push the REC key again during play or stop, recording will begin and the REC key will light up. If the REC key is again pushed during play or a stop, a sampling will be ended and a deed REC key will switch off blink 3 times. Å@ When unit is paused at the cue point, the unit will play when this key is pressed, and enter pause mode when CUE is released. Å@ the PLAY key is pressed during CUE playback, the unit will go into normal play mode. If Å@ CDX-05 can have another three cue points stored with the CUE 1-3 keys. The SAMPLER REC Sampler Play Å@ After sampling, push PLAY key, and Sampled track will start. If the PLAY key is de- tached, Sampler will stop. To memorize the CUE 1-3 points LOOP ON / OFF 1. Press the desired CUE key. CUE-SET / INS CUE 2 CUE 1 CUE 3 (TRK MEMO) PLAY Sampler Loop Å@ SAMPLER REC Å@ When the CUE key has the stored point, the CUE key lights. The stored cue point cannot be erased but can be overwritten. Å@ Å@ Presh tha LOOP key then Å@ push the LOOP key to turn the sampler loop play on and off. Å@ Effect time: 10msec - 16sec (default: 2sec) Å@ Effect beat: 32, 16, 8, 4, 2, 1, 1/2 (default: 4) Å@ Effect level: 0 - 100 (default: 75) Å@ Filter effect has two operation modes, manual mode and auto mode. In manual mode, filter frequency can be controlled with the Jog wheel. [. . . ] Å@ Pressing and holding the MASTER TEMPO key then moving the Jog wheel sets the key control value. Å@ Note that the key value shows a total of the value together with any changes made by using the slider. MASTER TEMPO COUNT RESET (DISPLAY) TAP NOTE ÅúWhen the master tempo function is activated, the key control function does not work. ÅúThe key control will return to 0% if you push the JOG wheel while operating. NOTE 3-2. Pitch Bending Å@ Å@ When playing back a disc, pressing the BEND + or key, or using the Jog wheel can change playback tempo momentary. [. . . ]