User manual VESTAX BDT-2500

[. . . ] Retain instructions-The safety and operating instructions should be retained for future reference. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions-All operating and use instructions should be followed. [. . . ] Protective Attachment Plug-The appliance is equipped with an attachment plug having overload protection. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. Lightning-For added protection for this product during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Servicing-Do not attempt to service product yourself as opening or removing covers may expose you to dangerrous voltage or other hazards. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. If the product dose not operate normally by following the operating instructions. Adjust only those controls that are coverd by the operating instructions as an improper adjustment of other, controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. When the product exhibits a distinct change in perfromance-this indicates need for service. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. [. . . ] To avoid this phenomenon, the speakers should be placed as far away from the turntable as possible. Also, it is recommended to use the most solid base available for turntable support and isolation. Hum may be caused by appliances that use thermostats or transformers and the greatest distance possible from these sources is recommended. SPECIFICATION 4 EACH PARTS NAME q Power Switch w Turntable Platter e Center Spindle r Balance Weight t Arm Rest y Tone Arm u Main Pitch Control i Fine Pitch Control o Cartridge/Headshell !0 Speed Select Button !1 Start/Stop Button !2 Output Cable !3 Phono-amp Bypass Switch !4 AC Power Cord !5 Hinge Holder !6 Dust Cover BEFORE USE NEVER connect the AC power cord until assembly is complete. 5 ASSEMBLY AND SET-UP q w platter e platter r t y u 6 CONNECTION USING PHONO INPUT Connection of the ground cable is not required. USING LINE INPUT 7 CONNECTION DIAGRAM(EXAMPLE) USING PHONO INPUT USING LINE INPUT 8 ADJUSTMENT As shown in the illustration, overhang indicates the distance from the stylus tip to the center of the turntable spindle when the stylus tip falls on the extension of a straight line from the pivot of the tonearm to the center of the spindle. [. . . ]