User manual VERCIEL TL 40N

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VERCIEL TL 40N. We hope that this VERCIEL TL 40N user guide will be useful to you.


VERCIEL TL 40N : Download the complete user guide (2188 Ko)

Manual abstract: user guide VERCIEL TL 40N

Detailed instructions for use are in the User's Guide.

[. . . ] If that doesn’t work, remove power from both units and start again from the beginning.  To ensure sufficient 434 MHz transmission, the outdoor transmitter should be placed a distance of no more than 200 feet (60 meters, open air) from the Color Weather station. INSTALL BATTERIES OR A/C POWER ADAPTER INTO THE WEATHER STATION: Function Buttons Button Press and Release Functions Activates backlight when using only batteries. Hold 3-5 seconds LIGHT/SNOOZE Trigger snooze when time alarm is sounding. SEARCH IN/OUT HEAT/DEW MIN / MAX ALARM SET RCC SEARCH UP C/F DOWN LIGHT ON/OFF AUTO ROTATE IN / OUT Switch between indoor and outdoor temperature/humidity readings Shows Heat Index and Dew Point Shows MIN and MAX values View Alarm Confirm setting. [. . . ] These physicists have created an international standard, measuring a second as 9, 192, 631, 770 vibrations of a Cesium 133 atom in a vacuum. WWVB RECEPTION icon with full signal strength will appear on screen if the reception of atomic time is successful. The atomic weather station will have a daily synchronization at 02:03 and 03:03 everyday. Each reception cycle is minimum 2. 5 minutes and maximum 10 minutes. A/C Adapter access Battery compartment 1 In normal mode, press the RCC button until the reception icon appears to enforce searching of radio-controlled clock signal. If this icon disappears afterwards, radio time signal is not available at the moment.    When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes. The alarm icon will remain solid.  Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 6 feet (2 meters). Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases, please place the unit close to a window and/ or point its front or back towards the Fort Collins, Colorado, transmitter. During nighttime, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.   NOTE: When the alarm sounds, it continues for 2 minutes and then shuts off completely. FAHRENHEIT/CELSIUS: Display: Press and release the C/F button once to switch from Fahrenheit to Celsius. MIN/MAX TEMPERATURE/HUMIDTY: VIEW MIN/MAX:  INDOOR: When Indoor Temperature/Humidity is displayed, press the MAX/MIN button to view MAX, MIN and Current Indoor temperature/humidity.  If the unit does not work properly, change the batteries.  WEATHER FORECAST ICONS: The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure. The weather forecast is based on atmospheric pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we cannot be responsible for any loss caused by an incorrect forecast. ALARM SET:  ALARM HOUR: Press and hold ALARM button to enter alarm time setting mode. ALARM ACTIVATION:  Press and release the ALARM button once to show Alarm Time.  Press and release the ALARM button repeatedly to activate or deactivate the Alarm. The SNOOZE: alarm icon appears when alarm is activated. 2 POSITIONING THE OUTDOOR TEMPERATURE SENSOR The remote temperature sensor should be mounted vertically to avoid damage.  WALL MOUNT Install one mounting screw (not included) into a wall within transmission range of the weather station, leaving approximately 3/16 of an inch (5mm) extended from the wall. Place the transmitter onto the screw, using the hanging hole on the backside. Gently pull the transmitter down to lock the screw into place. repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. . This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. VERCIEL, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. [. . . ] The maximum transmitting range in open air is 200-feet (60 meters) obstacles such as walls, concrete, and large metal objects can reduce the range. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE VERCIEL TL 40N




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VERCIEL TL 40N will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.