User manual VERBATIM 5.1 CHANNEL USB GAMING HEADSET

[. . . ] This device will apply your PC/Notebook default driver as a general USB headset without real/virtual multi-channel surrounding effect. Note: Some USB Host Controllers may have a problem with data stream package loss; this will influence output audio data and make some discontinuous sound. If when you plug in your 5. 1 Channel Gaming USB Headset it does not automatically change audio device to USB audio, please switch the audio device to USB audio via `Sound and Audio Devices Properties' in the control panel. 4 Installation Install Xear 3D Technology driver: · · · · · OS Support: Windows 2000, XP, Vista System recommended: use Intel Pentium III or AMD K6 500 CPU above At least 512MB RAM At least 50 MB hard disk space Supports direct sound 3D Note: Windows OS has default USB driver support, but does not support HRTF 3D, EAX, and Virtual Multi-channel sounds effect function. If you want to enjoy these additional features, you must install the Xear 3D sound audio driver. [. . . ] If it connects properly, the driver will detect which port is correct. When the USB sound icon is showing, it means the Xear3D sound driver was initialized and is working now. If you have more than one USB port and you forgot which one was installed with the Xear 3D sound driver, this icon will show you are connected to the right port. 5 User Interface and Function Control: 1. Analog Output Channels Mode: Headphone, 2Ch, 4Ch, and 6Ch for selected, and the 6Ch will be set as default. DSP Mode: to adjust preferred effect while applying the virtual 7. 1Ch speaker mode. Channel Display & Speaker Test: to present current analog output channel status and directly click speaker graphic for sound testing. Advanced Setting: for personal audio setting at multi-channels. 6 Main Setting: Multi-Channel Advanced Setting: 1. Bass enhancement with 3 modes selections Virtual 7. 1CH SPEAKER SHIFTER 1. Start Microphone Echo Function Click this button to control all karaoke functions Can reset all settings to default value Select this button to pop up a dialog box to enable microphone function. Click `OK' button to select recording source and enable microphone Adjust echo low/high This function only supported in multi-channel audio products. When you enable microphone echo then can pull down the menu to select magic voice. This function can adjust tune of background music to fit your singing. This function can control singer's vocal of background music and cancel it as possible. 4. Vocal Cancelling Control Bar 10 Technical Support: If you are experiencing difficulty installing or using your Verbatim product, please visit the main Verbatim Technical Support website at www. verbatim-europe. com. From this page you can access our library of user documentation, read answers to frequently asked questions, anddownload available software updates. Although most of our customers find this content sufficient to put them back on the right track, thispage also lists ways in which you can contact the Verbatim Technical Support Team directly. [. . . ] The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local municipal household waste disposal service or shop from where you purchased the equipment. 11 CE Declaration: It is hereby declared that this product complied with the essential protection requirements of Council Directive 2004/108/EC and its amendments on the approximation of the laws of the Member States relating to electromagnetic compatibility. This declaration applies to all specimens manufactured identical to the model submitted for testing/evaluation. [. . . ]