User manual USP CONNECTORS EWP PRODUCT GUIDE 2005

[. . . ] EWP Product Guide 2005 U www. USPconnectors. com THF17925 LSSH23 THO17118 Lumberton · Largo · North Wilkesboro · Montgomery · Houston · Rancho Cucamonga · Livermore · Long Beach · Thornhill, Ontario © Copyright 2005 United Steel Products Company USP952-051 2 Indexes USP Index BPH Beam & Purlin Hangers . 10-11 Reference Number Index About the Reference Numbers Reference numbers shown throughout the charts in this catalog are part numbers which may be more familiar to customers in various regions of the United States. These are included for the convenience of our new customers who have recently switched from a competitor's product line to USP. The reference numbers in this catalog are for general application comparison only and should not be used as a substitution tool. [. . . ] Reference page 13. USP Series PH PHI PHM Nailer Size 2X 3X Fastener Schedule1, 2 Header Joist DF-L / SP 100% 1635 1750 1635 1360 1360 1360 3010 3570 3325 Allowable Loads (Lbs. )3 S-P-F 100% 1375 1865 1695 1360 1360 1360 2530 2630 2580 continued 25 (2) 2X 2X 3X (2) 2X 2X 3X (2) 2X (2) 16d x 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 16d x 2-1/2 (2) 10d (2) 10d (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 Typical PHX installation 1) 10d x 1-1/2 nails are 9 gauge (0. 148 diameter) by 1-1/2 long. 3) Listed loads shall not be increased. L L TF TF H H W W D D PHM Specialty Options Chart ­ refer to Specialty Options pages 55 to 58 for additional details. Option USP Series PH PHI PHM PHX PHXU MPH PH PHI Allowable Loads PHM PHX PHXU PH PHI PHM PHX PHXU MPH MPH Skewed1, 3, 5 1° to 84° 1° to 84° 1° to 84° 1° to 84° 1° to 60° 1° to 60° Sloped Seat2, 3 1° to 45° 1° to 45° 1° to 45° 1° to 45° 1° to 45° 1° to 45° Sloped / Skewed1, 2, 3 Sloped Top Flange4 See Sloped Seat and Skewed 0° to 35° See Sloped Seat and Skewed 0° to 35° See Sloped Seat and Skewed 0° to 35° See Sloped Seat and Skewed 0° to 35° See Sloped Seat and Skewed 0° to 35° See Sloped Seat and Skewed -- -100% of table load up to Max. Top Flange Offset5 -- --- --- --- --- --- -- PHX Saddle5 -- --- --- --- --- -N/A Ridge Range 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load Add SK, angle required, and right (R) or left (L), to product number. PH1795-SK45R 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load Add SL, slope required, and up (U) or down (D), to product number. PH1795-SL30D 100% of table load per side 100% of table load per side 100% of table load per side 100% of table load per side 100% of table load per side 100% of table load per side 0° to 45° 0° to 45° 0° to 45° 0° to 45° N/A N/A 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load 100% of table load Reduce allowable table loads using straight-line interpolation Hanger Width 3-1/2 or less 60% 3-9/16 to 5-1/2 75% 5-9/16 to 7-1/2 85% % of table load: Ordering See Sloped Seat and Skewed. PH1795-SK45RSL30D 1) Skewed hangers with skews greater than 15° may have all joist nailing on outside flange. 2) Sloped or sloped/skewed hangers with slopes greater than 15° may have additional joist nails. 3) All sloped, skewed, or combinations require bevel cut on joist in all applications and web stiffeners with I-joists. 4) Sloped top flanges with slopes greater than 15° may have additional header nails. 5) Skewed, top flange offset, or saddle options will have a solid, welded top flange. Add DA, and Add SA, angle required to and saddle to product number. PH1795-SA=5-1/2 N/A N/A N/A www. USPconnectors. com e-mail: info@USPconnectors. com © Copyright 2005 United Steel Products Company USP952-051 26 EWP Top Mount Hangers Charts Web Stiffener Reqd. Dimensions Fastener Schedule2, 3, 4, 8 100% Allowable Loads (Lbs. )1, 5, 7 Header Material DF-L / SP Uplift 6 Steel Gauge DF-L / SP I-Joist Joist Size THO15925 PH15925 MPH210 BPH15925 PHI15925 USP Stock No. Masonry 1-1/2 x 9-1/4 W29. 25 B29. 25 ITT29. 25 Ref. No. -x ----x ----x ----x ----x --------------------x -x --x x -- 18 12 12 12 12 18 12 12 12 12 16 12 12 12 12 18 12 12 12 12 16 12 12 12 12 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-9/16 1-1/2 1-1/2 W 9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 9-1/2 9-1/2 9-1/2 9-1/2 11-1/4 9-1/2 H 2-3/8 2-1/2 2-1/2 2-1/2 2-3/8 2 2 D --- L 1-1/2 1-1/2 3 TF Header (10) 16d (2) 16d (6) 10d (2) 10d x 1-1/2 1005 1345 (4) 10d x 1-1/2 (2) 10d x 1-1/2 ----3065 2600 -- Joist 1290 1335 1005 1005 3065 3065 2625 1990 2600 2440 2435 1655 1400 1400 1360 1360 1290 1335 1090 1090 3065 3065 2625 1990 2600 2440 2435 1655 1400 1400 1360 1360 1290 1335 1030 1030 3065 3065 2625 1990 2600 2440 2435 1655 1400 1400 1360 1360 1290 1335 1205 1205 3065 3065 2625 1990 2600 2440 2435 1655 1400 1400 1360 1360 1030 1030 1030 1030 3065 3065 2625 1990 2600 2440 2435 1655 1400 1400 1360 1360 1290 1335 1005 1005 2600 2440 2435 1655 1400 1400 1400 1400 1290 1335 1005 1005 1290 1335 1030 1030 2600 2440 2435 1655 1400 1400 1400 1400 1290 1335 1030 1030 1290 1335 1030 1030 1400 1400 1400 1400 1030 1030 1030 1030 2600 2440 2435 1655 1400 1400 1400 1400 4425 1290 3395 2600 1400 3330 4425 --4425 1335 3395 2440 1400 3080 4425 --4425 995 3000 2435 1400 2865 4425 ------------------------------------ ------- 133% 230 625 ---- THO15950 1-1/2 x 9-1/2 PH1595 BPH1595 PHI1595 WM29. 25 B29. 5 ITT29. 5 -- -- 6-1/2 6-1/2 --7 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1360 1400 3-3/4 1-1/2 1-1/2 3 (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (2) 16d (6) 10d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1090 1345 ----3065 2600 245 625 --230 625 ---- W29. 5 THO15112 1-1/2 x 11-1/4 PH15112 MPH212 BPH15112 PHI15112 MPH1595 WM29. 5 -- -- 2-1/2 2-1/2 2-1/2 2 6-1/2 6-1/2 --7 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1360 1400 1-7/16 1-1/2 3 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (2) 16d (6) 10d (2) 10d x 1-1/2 1030 1345 (4) 10d x 1-1/2 (2) 10d x 1-1/2 3065 2600 --- 2600 -2600 ---2600 ---2600 ---2600 --2795 ---2795 --2795 --2795 --------- W211. 25 B211. 25 ITT211. 25 11-1/4 2-3/8 11-1/4 2-1/2 11-1/4 2-1/2 11-7/8 2 11-1/4 2-1/2 11-7/8 2-3/8 11-7/8 2-1/2 11-7/8 2-1/2 11-7/8 2-1/2 14 14 14 14 14 2-3/8 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2 2 2 THO15118 1-1/2 x 11-7/8 PH15118 BPH15118 PHI15118 WM211. 25 B211. 88 ITT211. 88 -- -- 6-1/2 6-1/2 --7 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1360 1400 1-9/16 1-1/2 3 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (2) 16d (6) 10d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1205 1345 --------3065 2600 --- 245 625 --230 625 --230 --230 230 --230 230 ----970 230 625 ---970 ------- -- W211. 88 THO15140 1-1/2 x 14 PH1514 BPH1514 PHI1514 MPH15118 WM211. 88 ITT214 -- -- 6-1/2 6-1/2 --7 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1360 1400 3-3/4 1-1/2 1-1/2 3 (2) 16d duplex (2) 10d x 1-1/2 (10) 10d (10) 16d (2) 16d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1030 1030 3065 2600 -- -- --- --- --- -- 6-1/2 6-1/2 -7 THO16925 1-5/8 x 9-1/4 1-5/8 x 9-1/2 1-5/8 x 11-1/4 1-5/8 x 11-7/8 1-5/8 x 12 PH16925 PHI16925 MPH1514 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1360 1400 3-3/4 1-1/2 3 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 16d (2) 10d x 1-1/2 (2) 10d x 1-1/2 1005 1345 2600 -- W1. 68/9. 25 -- --- -- ITT1. 68/9. 25 18 1-11/16 9-1/4 12 1-11/16 9-1/4 12 1-11/16 9-1/4 12 1-11/16 9-1/4 18 1-11/16 9-1/2 16 1-11/16 11-1/4 6-1/2 6-1/2 --7 THO16950 THO16112 PH16112 PHI16112 MPH16925 WM1. 68/9. 25 ITT1. 68/11. 25 -- --- -- 1-5/8 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 3-3/4 1-1/2 1-1/2 3 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (6) 10d (2) 16d (2) 10d x 1-1/2 1005 1345 (2) 10d x 1-1/2 1030 1345 (2) 10d x 1-1/2 --2600 -- W1. 68/11. 25 12 1-11/16 11-1/4 2-1/2 12 1-11/16 11-1/4 2-1/2 12 1-11/16 11-1/4 2-1/2 16 1-11/16 11-7/8 16 1-11/16 12 1-11/16 12 1-11/16 16 1-11/16 12 1-11/16 12 1-11/16 7 18 12 12 12 7/10 7 12 12 1-11/16 1-13/16 1-13/16 1-13/16 1-13/16 1-13/16 1-13/16 1-13/16 1-13/16 12 12 12 14 14 14 7-1/4 9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 14 2 2 6-1/2 6-1/2 --7 THO16118 THO16120 MPH1612 PHI1612 MPH16112 WM1. 68/11. 25 ITT1. 68/12 1-5/8 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 3-3/4 1-1/2 1-1/2 3-3/4 1-3/4 3 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (6) 10d (2) 10d x 1-1/2 1030 1345 (2) 10d x 1-1/2 1030 1345 ----- W1. 68/12 THO16140 1-5/8 x 14 1-3/4 x 7-1/4 PH1614 PHI1614 WM1. 68/12 ITT1. 68/14 -- -- 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3-1/4 2 2-3/8 2-1/2 2-1/2 2-1/2 3-1/4 2-1/2 3 6-1/2 -7 1-5/8 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 (2) 16d duplex (2) 10d x 1-1/2 (10) 10d (2) 16d (2) 10d x 1-1/2 (2) 10d x 1-1/2 1030 1030 2600 -- W1. 68/14 6-1/2 6-1/2 10 --6-1/2 6-1/2 7 10 7 7 230 1-3/4 x 9-1/4 PHXU17725 THO17925 BPH17925 PH17925 PHI17925 PHM17925 PHXU17925 MPH17925 MPH1614 WPU1. 81/7. 25 ITT9. 25 B9. 25 W9. 25 -- -WP9. 25 WPU1. 81/9. 25 -- -- WM1. 68/14 1-5/8 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 2-1/2 (8) 16d 1-9/16 (6) 10d 1-3/4 (10) 16d 3 (2) 16d 1-3/4 (2) 10d x 1-1/2 3 (2) 16d 2-1/2 (8) 16d 3-3/4 (2) 16d duplex 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d x 1-1/2 -(2) 10d x 1-1/2 995 (4) 10d x 1-1/2 -(2) 10d x 1-1/2 -(2) 10d x 1-1/2 1400 (2) 10d x 1-1/2 -(6) 10d x 1-1/2 -(2) 10d x 1-1/2 -4425 1345 3395 2600 1400 3495 4425 -- 3070 -995 -2245 -1655 -1400 -2865 -3070 --- 2990 continued on next page Customer Service / Technical Assistance Burnsville, MN Corporate Office 1-800-328-5934 160% PSL SPF LVL LSL 230 625 ---- 245 625 --230 625 ---- 245 625 --230 625 --230 --230 230 --230 230 ----970 230 625 ---970 ------- -- 230 EWP Top Mount Hangers Charts Web Stiffener Reqd. continued 100% Allowable Loads (Lbs. )1, 5, 7 Header Material DF-L / SP I-Joist DF-L / SP Masonry 27 Uplift 6 Dimensions Fastener Schedule2, 3, 4, 8 Joist Size THO17950 PH1795 BPH1795 PHI1795 USP Stock No. Steel Gauge 1-3/4 x 9-1/2 W9 WP9 B9 ITT9. 5 Ref. No. -x x x x 18 12 1-13/16 9-1/2 12 1-13/16 9-1/2 1-3/4 W 9-1/2 H 2-3/8 2-1/2 2-1/2 2-1/2 3-1/4 2-1/2 2 2 D --- L 1-1/2 1-3/4 3 3 TF Header (10) 16d (2) 16d (2) 16d (8) 16d (6) 10d (6) 10d (2) 10d x 1-1/2 1260 1345 (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (6) 10d x 1-1/2 --3395 2600 Joist 1290 1335 1260 1260 3395 3395 3000 2245 2600 2440 2435 1655 ---- 133% 245 625 --970 230 625 --970 245 625 --970 625 ---------- PHXU1795 THO17112 PH17112 BPH17112 PHI17112 MPH1795 PHM1795 -- -- -- WM9 WPU1. 81/9. 5 ITT11. 25 -- -- 7/10 1-13/16 9-1/2 12 1-13/16 9-1/2 7 1-13/16 9-1/2 12 1-13/16 9-1/2 6-1/2 7 7 6-1/2 10 --- 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 2-1/2 1-9/16 1-3/4 3 3 3-3/4 -----3495 4425 -- 1400 1400 1400 1400 3330 3080 2865 2865 4425 4425 4425 3070 1290 1335 1100 1100 3395 3395 3000 2245 2600 2440 2435 1655 ----- --2990 ----- --x x x x B11. 25 16 1-13/16 11-1/4 (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (2) 16d (2) 16d (8) 16d (6) 10d (2) 16d (2) 16d 12 1-13/16 11-1/4 2-3/8 12 1-13/16 11-1/4 2-1/2 12 1-13/16 11-1/4 2-1/2 7 1-13/16 11-1/4 3-1/4 1-3/4 11-7/8 2 (2) 10d x 1-1/2 1100 1345 (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (6) 10d x 1-1/2 3395 2600 1-3/4 x 11-1/4 PHXU17112 THO17118 PH17118 BPH17118 PHI17118 MPH17112 PHM17112 WP11. 25 -- -- -- 6-1/2 7 7 WPU1. 81/11. 25 ITT11. 88 -- -- 7/10 1-13/16 11-1/4 2-1/2 12 1-13/16 11-1/4 2-1/2 18 12 1-13/16 11-7/8 2-3/8 12 1-13/16 11-7/8 2-1/2 7/10 1-13/16 11-7/8 2-1/2 12 1-13/16 11-7/8 2-1/2 12 1-13/16 7/10 1-13/16 12 1-13/16 16 1-13/16 12 1-13/16 12 1-13/16 7/10 1-13/16 12 1-13/16 16 1-13/16 12 1-13/16 12 1-13/16 7/10 1-13/16 12 1-13/16 18 12 18 12 2-1/8 2-1/8 2-1/8 2-1/8 12 1-13/16 7 1-13/16 12 1-13/16 7 1-13/16 12 1-13/16 12 12 12 12 12 14 14 14 14 14 14 14 16 16 16 16 16 9-1/2 9-1/2 16 2-3/8 2-1/2 2-1/2 3-1/4 2-1/2 2-3/8 2-1/2 2-1/2 2-1/2 3-1/4 2-1/2 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-3/8 2-1/2 3 3 7 1-13/16 11-7/8 3-1/4 12 1-13/16 11-7/8 2-1/2 6-1/2 10 --- 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 2-1/2 1-9/16 1-3/4 3 3 3-3/4 ----------------------3495 4425 -- 1400 1400 1400 1400 3330 3080 2865 2865 4425 4425 4425 3070 1290 1335 1305 1305 3395 3395 3000 2245 2600 2440 2435 1655 1400 1400 1400 1400 3330 3080 2865 2865 4425 4425 4425 3070 --------- --2990 -----2990 ---2990 -----2990 ----2990 ---------- --x x x x x x x x --x x x x (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1-3/4 x 11-7/8 W11 WP11 B11 (2) 10d x 1-1/2 1305 1345 3395 2600 3495 4425 -- PHXU17118 MPH17118 BPH1712 PHM17118 -- -- -- 6-1/2 6-1/2 10 -7 7 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 2-1/2 (8) 16d (6) 10d x 1-1/2 (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (6) 10d x 1-1/2 WM11 WPU1. 81/11. 88 -- --- -- -- 3-3/4 1-3/4 3 3 (2) 16d duplex (2) 10d x 1-1/2 (10) 16d (2) 16d (2) 16d (8) 16d 1-3/4 x 12 PH1712 PHXU1712 THO17140 PH1714 BPH1714 PHI1714 MPH1712 PHM1712 WP12 6-1/2 10 --7 7 3395 2600 3495 4425 -- 3395 3395 3000 2245 2600 2440 2435 1655 3330 3080 2865 2865 4425 4425 4425 3070 1760 1760 1760 1760 3395 3395 3000 2245 2600 2440 2435 1655 1400 1400 1400 1400 3330 3080 2865 2865 4425 4425 4425 3070 1760 1760 1760 1760 3395 3395 3000 2245 2600 2440 2435 1655 1400 1400 1400 1400 3330 3080 2865 2865 1290 1335 1030 1030 1400 1400 1400 1400 1290 1335 1030 1030 1400 1400 1400 1400 ------------- WPU1. 81/12 ITT14 -- -- 2-1/2 3-3/4 1-3/4 1-3/4 3 3 (2) 16d duplex (2) 10d x 1-1/2 (10) 10d (10) 16d (2) 16d (2) 16d (8) 16d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (6) 10d x 1-1/2 970 230 625 --970 230 625 ---230 230 ------ 1-3/4 x 14 W14 WP14 B14 (2) 10d x 1-1/2 1760 1760 3395 2600 3495 4425 -- PHXU1714 THO17160 1-3/4 x 16 PH1716 BPH1716 PHI1716 MPH1714 PHM1714 -- -- -- 6-1/2 6-1/2 10 --7 7 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 2-1/2 3-3/4 1-5/8 1-3/4 3 3 WM14 B16 ITT16 WPU1. 81/14 --x x x (2) 16d duplex (2) 10d x 1-1/2 (10) 10d (10) 16d (2) 16d (2) 16d (6) 10d (6) 10d (4) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1760 1760 3395 2600 3495 -- W16 WP16 PHM1716 2 - 2-1/8 x 9-1/2 2 - 2-1/8 x 11-7/8 THO20950 THO20118 PHI20118 PHI2095 MPH1716 -- -- ------- 6-1/2 6-1/2 7 7 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 WM16 1) When I-joist is used as a header, all nails must be 10d x 1-1/2. 4) NA16D-RS nails are 9 gauge (0. 148 diameter) by 3-1/2 long, hardened ring shank nails. 5) Masonry compressive strength shall be minimum 1500 psi for MPH hangers. 6) Uplift loads have been increased 33-1/3% or 60% for wind or seismic loads; no further increase shall be permitted 7) Some listed loads may be increased for short-term loading. Refer to code evaluation reports for USP Structural Connectors for details. 8) Minimum nail penetration shall be 1-1/2 for 10d nails and 1-5/8 for 16d nails. Joist limitations must be determined for each installation. ITT2. 06/11. 88, ITT2. 1/11. 88 -- -- ITT2. 06/9. 5, ITT2. 1/9. 5 -- -- 11-7/8 2-3/8 11-7/8 2-1/2 6-1/2 6-1/2 -- -- 1-15/16 1-15/16 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 (2) 10d x 1-1/2 1030 1345 (2) 10d x 1-1/2 1030 1345 L TF H D W continued on next page www. USPconnectors. com e-mail: info@USPconnectors. com © Copyright 2005 United Steel Products Company USP952-051 160% PSL SPF LVL LSL 245 625 --970 230 625 --970 245 625 --970 625 ---------- 970 230 625 --970 230 625 ---230 230 ------ 28 EWP Top Mount Hangers Charts Web Stiffener Reqd. continued 100% Allowable Loads (Lbs. )1, 5, 7 Header Material DF-L / SP I-Joist DF-L / SP Masonry Dimensions Fastener Schedule2, 3, 4, 8 Uplift 6 Joist Size 2 - 2-1/8 x 14 2 - 2-1/8 x 16 USP Stock No. THO20140 THO20160 THO23925 MPH23925 TFL2395 PHI2016 PHI2014 Steel Gauge ITT2. 06/14, ITT2. 1/14 -- -- Ref. No. ---- 2-1/4 - 2-5/16 x 9-1/4 PHI23925 W359. 25 ITT359. 25 ITT2. 06/16, ITT2. 1/16 -- -- -- 18 18 12 12 2-1/8 2-1/8 2-1/8 W 2-1/8 14 16 16 H 14 2-3/8 2-3/8 2-1/2 D 2-1/2 6-1/2 6-1/2 6-1/2 -7 --- -- L 1-15/16 1-15/16 1-7/8 3-3/4 1-1/2 3-3/4 1-7/8 TF 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 1-3/4 (2) 10d x 1-1/2 (2) 10d x 1-1/2 1400 1400 (10) 10d (10) 10d (2) 10d x 1-1/2 1760 1760 (10) 10d Header (2) 10d x 1-1/2 1760 1760 Joist 1760 1760 1760 1760 1760 1760 1760 1760 1400 1400 1400 1400 1400 1400 1400 1400 ---- 133% -- 230 230 265 -------- ------ 2-1/4 - 2-5/16 x 9-1/2 PHI2395 2-1/4 - 2-5/16 x 10 THO23100 MPH2310 PHI2310 MPH2395 W359. 5 ITT359. 5 -- -- -- 10/12 2-3/8 12 18 12 18 2-5/16 2-3/8 2-3/8 2-3/8 2-3/8 18 2-3/8 9-1/4 9-1/4 9-1/4 9-1/2 9-1/2 9-1/2 10 10 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-3/8 2-1/2 2 2-1/2 2 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 10d x 1-1/2 1245 1645 ----- (2) 10d x 1-1/2 1625 1625 1625 1625 1625 1265 2005 2005 2005 2005 1600 1700 1600 1230 2005 2005 2005 2005 1625 1625 1625 1625 2005 2005 2005 2005 1600 1700 1600 1230 2005 2005 2005 2005 1600 1700 1600 1230 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 1600 1700 1600 1230 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 2685 2685 2685 2600 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 2685 2685 2685 2600 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 1600 1700 1600 1230 2005 2005 2005 2005 1600 1700 1600 1230 1600 1700 1600 1230 2005 2005 2005 2005 ----------------------------------------- -3865 ------ W3510 ITT3510 -- -- -- 10/12 2-3/8 6-1/2 -7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (10) 10d (2) 10d x 1-1/2 1625 1625 --- 300 3865 2-1/4 - 2-5/16 x 11-7/8 PHI23118 TFL2314 TFI3514 TFL23118 WM3510 -- 10/12 2-3/8 -----x 12 18 12 18 16 MPH23118 W3511. 88 ITT3514 ITT3511. 88 WM3511. 88 MIT3514 -- 10/12 2-3/8 2-3/8 2-3/8 2-5/16 11-7/8 10 6-1/2 -7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 1-1/2 3-3/4 1-1/2 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 10d x 1-1/2 1245 1645 ---- 300 ---- 3865 ----- 11-7/8 2-1/2 11-7/8 2-1/2 14 14 2-1/2 2 6-1/2 --7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (6) 16d (2) 16d (6) 10d (6) 16d (2) 16d (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2560 300 2-5/16 3865 2-1/4 - 2-5/16 x 14 PHM2314 MPH2314 TFL2316 TFI3516 PHI2314 W3514 WP3514 -- 10/12 2-3/8 ---x x x x x x x x x ------7/10 12 18 16 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 14 14 14 16 16 16 16 16 18 18 18 18 18 20 20 20 20 9-1/4 9-1/4 9-1/4 9-3/8 9-1/2 9-1/2 9-1/2 20 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2 2 6-1/2 7 7 2-1/16 3 300 300 --300 300 --265 300 --265 300 --300 ------- 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 2-1/16 3 2 1-1/2 (2) 16d duplex (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 -----------3570 -- -3865 ---3865 ---3865 ---3865 ----4160 ------ WM3514 2-1/4 - 2-5/16 x 16 PHM2316 THO23180 MPH2316 TFI3518 PHI2316 W3516 MIT3516 -- -- 2-5/16 --- (2) 10d x 1-1/2 1245 1645 2560 3570 -- WP3516 -- 10/12 2-3/8 --7/10 12 18 16 6-1/2 7 7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 2-1/16 3 2 (2) 16d duplex (2) 10d x 1-1/2 (14) 10d (6) 16d (2) 16d (2) 10d x 1-1/2 (2) 10d x 1-1/2 WM3516 2-1/4 - 2-5/16 x 18 PHM2318 THO23200 MPH2318 TFI3520 PHI2318 W3518 MIT3518 -- -- --- (2) 10d x 1-1/2 2685 2685 2560 3570 -- WP3518 10/12 2-3/8 7/10 12 18 16 6-1/2 7 7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 2-1/16 3 (2) 16d duplex (2) 10d x 1-1/2 (14) 10d (6) 16d (2) 16d (6) 10d (2) 10d x 1-1/2 (2) 10d x 1-1/2 WM3518 2-1/4 - 2-5/16 x 20 PHM2320 MPH2320 TFL25925 PHI2320 W3520 MIT3520 -- -- --- (2) 10d x 1-1/2 2685 2685 2560 3570 -- WP3520 10/12 2-3/8 7/10 12 18 12 18 18 12 6-1/2 7 7 2-5/16 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 1-1/2 3-3/4 1-1/2 1-1/2 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 WM3520 WI39. 25 2-1/2 x 9-1/4 2-1/2 x 9-3/8 2-1/2 x 9-1/2 MPH25925 TFL25938 TFL2595 PHI25925 ITT39. 25 -- -- -- 10/12 2-9/16 2-1/2 6-1/2 2-1/2 2 2 --7 -- 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (6) 10d (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 1245 1645 ----- (2) 10d x 1-1/2 1245 1645 ITT39. 37 WI39. 5 ITT39. 5 4160 300 300 --- MPH2595 PHI2595 -- -- -- 10/12 2-9/16 2-1/2 6-1/2 2-1/2 7 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 continued on next page Customer Service / Technical Assistance Burnsville, MN Corporate Office 1-800-328-5934 160% PSL SPF LVL LSL 230 230 295 -------- 360 360 ---- 360 360 360 --360 360 --265 360 --265 360 --360 ------- 360 360 --- EWP Top Mount Hangers Charts Web Stiffener Reqd. continued 100% Allowable Loads (Lbs. )1, 5, 7 Header Material DF-L / SP I-Joist DF-L / SP Masonry 29 Uplift 6 Dimensions Fastener Schedule2, 3, 4, 8 Joist Size 2-1/2 x 10 THO25100 PHM2510 TFL25112 PHI2510 USP Stock No. Steel Gauge WI310 ITT310 Ref. No. -- PHX2510 2-1/2 x 11-1/4 HWI310 WPI310 ITT311. 25 -- -- -- 10/12 2-9/16 -----7/10 2-9/16 3/10 2-9/16 18 12 18 2-1/2 2-1/2 2-1/2 16 2-9/16 W 10 H 10 10 11-1/4 10 2-3/8 D 2-1/2 6-1/2 2-1/2 3-7/8 2 10 -7 -- L 2-3/16 3 3 TF 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d (4) 16d (6) 10d (2) 10d x 1-1/2 (2) 10d x 1-1/2 --3570 6015 (10) 10d Header (2) 10d x 1-1/2 1625 1625 Joist 1625 1625 1625 1625 2005 2005 2005 2005 3570 3080 2865 2865 5255 5755 5210 4370 1600 1700 1600 1230 2005 2005 2005 2005 1600 1700 1600 1230 2005 2005 2005 2005 1600 1700 1600 1230 2005 2005 2005 2005 1600 1700 1600 1230 2005 2005 2005 2005 5255 5755 5210 4370 ----3570 3080 2865 2865 ------------- -- 133% ----4160 ---- 300 ------- MPH25112 PHI25115 TFL25115 PHI25112 WI311. 25 ITT311. 5 -- 10/12 2-9/16 11-1/4 2-1/2 6-1/2 11-1/4 2-1/2 11-1/2 2 -7 1-1/2 3-3/4 1-1/2 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 10d x 1-1/2 1245 1645 ----- (2) 10d x 1-1/2 1245 1645 300 2-1/2 x 11-1/2 MPH25115 PHI25118 TFL2512 TFL25118 WM311. 5 WI311. 88 ITT312 WI311. 5 -- 10/12 2-9/16 ----12 18 12 18 2-1/2 2-1/2 2-1/2 2-1/2 11-1/2 2-1/2 6-1/2 11-1/2 2-1/2 11-7/8 2 -7 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 3-3/4 1-1/2 3-3/4 1-1/2 3 3 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 10d x 1-1/2 1245 1645 --- 300 ------- 2-1/2 x 11-7/8 ITT311. 88 4160 ------ MPH25118 PHI2512 WM311. 88 WI312 -- 10/12 2-9/16 11-7/8 2-1/2 6-1/2 11-7/8 2-1/2 12 12 12 12 2 -7 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (2) 16d duplex (2) 10d x 1-1/2 (6) 10d (2) 16d (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 ---3570 6015 -- 300 4160 2-1/2 x 12 PHX2512 TFL2513 TFL2514 PHI2514 TFI314 PHM2512 2-1/2 x 13 MPH2512 HWI312 ITT313 ITT314 WPI312 -- 10/12 2-9/16 ---7/10 2-9/16 12 2-1/2 3/10 2-9/16 18 18 16 2-1/2 2-9/16 2-1/2 12 2-1/2 6-1/2 2-1/2 3-7/8 2-1/2 2 2 10 --6-1/2 10 --6-1/2 10 --7 7 -7 7 -7 7 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 (4) 16d (6) 10d (6) 10d (6) 16d (2) 16d (4) 16d (2) 10d x 1-1/2 300 -- -4160 -----4160 -----4160 ---4160 ---- WMI312 ------------x x x x -- 13 14 14 14 14 14 14 16 16 16 16 16 16 18 18 18 18 18 3-3/4 1-1/2 1-1/2 2 3 3 (2) 16d duplex (2) 10d x 1-1/2 (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 ----2560 3570 6015 -- 1600 1700 1600 1230 1600 1700 1600 1230 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 5255 5755 5210 4370 2645 2645 2645 1800 1600 1700 1600 1230 2235 2265 2560 1660 2005 2005 2005 2005 3570 3080 2865 2865 5255 5755 5210 4370 2685 2685 2685 2600 2235 2265 2560 1660 2005 2005 2005 2005 5255 5755 5210 4370 ------------- 300 300 300 ---265 300 300 ---265 300 ------ 2-1/2 x 14 PHX2514 2-1/2 x 14-1/4 PHM2514 MPH2514 TFL2516 TFI316 WI314 MIT314 HWI314 WPI314 WMI314 ITT316 -- 10/12 2-9/16 7/10 2-9/16 3/10 2-9/16 12 18 18 16 2-9/16 2-9/16 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3-7/8 2-1/2 2 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 THO25142 -- -- 14-1/4 2-3/8 2-1/2 2-1/2 2-1/2 3-7/8 2-1/2 2-3/8 2-1/2 2-1/2 3-7/8 2-1/2 3-3/4 1-3/4 1-1/2 2 3 3 2 2 3 (2) 16d duplex (2) 10d x 1-1/2 (12) 10d (6) 10d (6) 16d (2) 16d (4) 16d (2) 10d x 1-1/2 2645 2645 (2) 10d x 1-1/2 1245 1645 (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 -------2560 3570 6015 -- 2-1/2 x 16 PHX2516 PHM2516 MPH2516 TFI318 PHI2516 WI316 MIT316 HWI316 WPI316 WMI316 MIT318 -- 10/12 2-9/16 7/10 2-9/16 3/10 2-9/16 12 18 16 2-9/16 2-9/16 2-1/2 2-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2005 2005 THO25180 2-1/2 x 18 PHI2518 -- -- 3-3/4 (2) 16d duplex (2) 10d x 1-1/2 (14) 10d (6) 16d (4) 16d (2) 10d x 1-1/2 (2) 10d x 1-1/2 (2) 10d x 1-1/2 2685 2685 2560 6015 -- PHX2518 1) When I-joist is used as a header, all nails must be 10d x 1-1/2. [. . . ] Inverted Flange Hanger: · For skewed-only hangers, the flange on the cut side can be inverted at 100% of the table load. · When nailing into the carrying member's end grain, the allowable load is 0. 65 of the table load. · Hangers with one flange inverted achieve 100% of listed table load. · Specify right or left flange when inverting only one flange. Plumb height Specify angle Specify angle Typical SUH hanger skewed, right shown Type A (bevel cut required) Typical SUH formed hanger skewed, right shown Type B Specify angle Slope angle Joist height Skew angle Typical HD hanger sloped seat, down shown Typical HD hanger sloped down, skewed left shown 2 1 /8 H W Typical GHF hanger one flange inverted, left shown Typical HD hanger inverted flange Customer Service / Technical Assistance Burnsville, MN Corporate Office 1-800-328-5934 Open Top Flange Hanger Specialty Details See Specialty Options Chart for each hanger series for load reductions and hanger maximum range of skew, slope, etc. [. . . ]