User manual UNITED OFFICE ULG 300 A1 A3 LAMINATOR

[. . . ] Unplug the power cable after every use and before cleaning, so as to prevent the appliance from inadvertently switching itself on. The safety concept can work only if the appliance is in a faultless condition. Never perform hot lamination on flammable, heat-sensitive and/or meltable materials and do not laminate drawings on temperature-sensitive paper or material that will undergo changes in colour or quality when subjected to heat. Although the laminator satisfies all predominant safety norms and standards, errors can never be completely discounted - as with all electrical appliances. [. . . ] attainment of the operating temperature is indicated by the lighting up of the green LED indicator lamp "Ready" y. For a more uniform laminating result we recommend, especially for thinner foils (below 125 Micron) and after adjustment to a different foil thickness, to first wait an additional 2-3 minutes before beginning with lamination. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. Lay the document to be laminated into a laminating pouch of the appropriate size. If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Lay the right or left edge of the laminating pouch against the pouch format lock r (closed side leading). Slide the pouch format lock r together until the selected format size is reached. Should the laminating pouch be pulled in at an angle, use the "Anti-Blocking Funktion" as described in chapter 11. Pull out the document supports s so that the documents can be pulled in straight into the slot for manual foil feed t. Take note: For cold lamination, ALWAYS place the foil thickness switch o at 125 microns. The red ON/OFF indicator lamp u and the green indicator lamp "Ready" y now glow. Now slide the laminating pouch slowly into the When you have slid the laminating pouch several Centimetres into the slot t, it will start to be pulled in automatically. Release the laminating pouch as soon as you notice it being pulled in automatically. Ensure there is at least 45 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamination. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. The finished laminated pocket is now ejected from the foil slot a of the laminator. Only after hot lamination: Remove them immediately from the appliance, as hot foil pockets can still be easily deformed. To improve the lamination result, you can weigh down the still hot foil bag with a book, a file folder or other heavy, smooth object. If you do not want to start another lamination Process, turn the foil thickness switch o to ABS (OFF) and withdraw the plug from the mains power socket. To trim, press the cutting head e down with the right hand and then slide it with one pull or push over the document. At the start of the lamination process, the pouch may be pulled in at an angle or jam itself inside the appliance. [. . . ] The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. [. . . ]