User manual UNITED OFFICE KH 4408 SHREDDER

[. . . ] Dispose of the material immediately after unpacking or keep it in a safe place not accessible to children. Lay the power cable in such a way that no one can tread on or trip over it. The following safety instructions must always be complied with when using electrical appliances: · Do not place the appliance in close vicinity to sources of heat and water sources. [. . . ] Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. Time has been reached, the appliance must be stopped until the motor has cooled itself down, for ca. Remove all staples and paper clips before feeding paper into the cutter opening 2. Allow the appliance to cool down completely before continuing to use it. Insert paper from above and in portrait format into the cutter opening 2. The motor starts automatically and switches itself off automatically if no further paper is inserted. Take note: Always insert small papers into the cutter opening 2 approx. Slide the switch 1 into the position "Rev" should the paper to be shredded jam. The appliance now goes into reverse and the paper to be shredded is returned. Pull the paper to be shredded out of the appliance and then place the switch 1 at "Auto". switching the appliance off: · When you no longer need the appliance, always remove the plug from the mains power socket. Notice regarding overheating of the appliance: If it overheats, the appliance switches off automatically. Remove possible residues in the cutter opening 2 with a suitable object. If the material to be shredded jams: This means that you have inserted too much paper into the appliance (max. Slide the switch 1 into the position "Rev" should the paper to be shredded jam. The appliance now goes into reverse and the material to be shredded is returned. [. . . ] The warranty covers only claims for material and manufacturing defects, not for worn parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty becomes void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]