User manual UNITED OFFICE KH 4407 SHREDDER

[. . . ] Should the power cable or the plug become damaged, arrange for it/them to be repaired by authorised specialists or Customer Services as soon as possible. Do not expose the appliance to rain and never use it in a humid or wet environment. ⷠEnsure that the power cable never becomes moist or wet during operation. Ensure that the appliance and the power socket are easily and quickly accessible in the event of an emergency. [. . . ] Note: Should you need to be absolutely sure that the information on the magnetised strip has been irrevocably destroyed, insert the credit card into the middle of the cutter opening for paper r. Take note that the waste will then fall into the large collection container t. If need be, empty if first, so as to ensure an easier separation of paper and plastic waste. : NEVER place a finger into the central hole of a CD when you are feeding it into the appliance. ⷠInsert the CD from above into the middle of the CD/Credit card cutter opening e. clearing a material blockage: · Press and hold the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned. ⷠPlace the switch w into position (OFF) as soon as the jammed item is returned. switching the appliance off: · To switch the appliance off, move the switch w into the middle position (OFF). ⷠDispose of the waste material in an environmentally responsible manner. Emptying the large waste container (Paper) Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. ⷠRemove the cutter attachment q from the large waste container t. ⷠRemove the small waste container u at the front of the large waste container t, so that it does not fall out. ⷠEmpty the large waste container t and then put everything back together again. emptying the small waste container (Plastic) · Remove the small waste container u from the front of the large waste container t to empty it. Notice regarding overheating of the appliance: If it overheats, the appliance switches itself off automatically. Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. ⷠTo switch the appliance off, move the switch w into the middle position (OFF). [. . . ] Dispose of the appliance through an approved disposal centre or at your community waste facility. When the appliance is switched on, however, the shredding process will not start: · the appliance has overheated and triggered the automatic safety switch-off. Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. ⷠTo switch the appliance off, move the switch w into the middle position (OFF). [. . . ]